Nuts

[H-man]

Here're the 2 links as promised  ;)

http://www.racebolts.com/
http://www.yoyodyneti.com/default.aspx

  H.

[cornercamping]

Thanks.  I'll be investigating now.  Worse case, it goes to JeF4y's  ;D

[cornercamping]

Can't you just pick a model and get all the right bolts  ???  Doesn't anyone make it already "pre figured out" so I don't have to try and match it up  ???  Kinda like:

2005 Ducati 749/999 a
Select: Race/Saftey Wire
Location: Suspension bolts, engine bolts, brake bolts, ect.

where I can pick from drop down boxes.  All the websites have sizes and crap.  Yeah, I'm not the guy that puts the right screw in the right hole.  Put a bunch of them infront of me and I don't have the patientce to figure it out.   :(

I want all the bolts on the bike in aluminum.  There, that was easy.  Now where's the drop down box that let's me pick that option, and then they just send me a whole kit with dummy directions saying part A goes here.  Part B goes there, ect.

THIS IS TOO DAMN COMPLICATED !c >:(

[cornercamping]

H,   another website for nuts and bolts is:

www.tastynuts.com


Yes, I'm being serious.  ;)

[H-man]

There ya go.  Yet another entrepreneurial opportunity!  Go for it Dan.

There's bound to be others like you...er... well others who would prefer a prepared set of pre-drilled fasters.  You might even tap into the bling bling racers by offering fashionable colours.

[Jeff]

Dan...

Dead serious...  Pull the bolts/nuts you need drilled and mail them to me w/$20 for a few bits and my time & return shipping.

PM me for my address if you want to do this.

[ecumike]

Dan, I think you got all the nuts you need in that box of your's that's attached to your neck. :)

C'mon.. you can't drill a stupid little bolt & nut?

Are you sure you should even be operating that piece of equipment that you're trying to put the safety wire bits on?  :D

[H-man]

Dan...

Dead serious...  Pull the bolts/nuts you need drilled and mail them to me w/$20 for a few bits and my time & return shipping.

Whadda country!  8)  There's your labour for your new enterprise.  Just ship a case of assorted fasteners to ole Jeffy  ;)

[H-man]

Dan, I've got jigs, a vise and a hand drill.  I'm in Royal Oak.  If you supply the bits, you're welcome to swing on over to my humble abode and we can knock these out in no time.

And you can bring a 6 of Pete's Wicked Ale witcha 8)


Hope I don't live to regret this offer.

[cornercamping]

 ;D ;D  You guys are something else.  First, I gotta go get the bike next week.  That's why I wanted to order the bolts now.  
My problem isn't just drilling them, it's TAKING THEM OFF the bike without stripping them and so on. That's why I want a bolt for bolt kit.  As I remove one OEM bolt, I replace it with a new one that's all ready drilled.  If I don't do it that way then I'm going to need a tap set too  ::)

Let me get the bike first, and we'll go from there.  It's enroute.   I just wanted to order the stuff now so it would be here when the bike gets here.

[cornercamping]

Hope I don't live to regret this offer.

 

 :P

[H-man]

Just give me a jingle whenever you're ready.  We can do this nice and slow.  I'll be right there to talk you through it.