Hello Guest

Wiring question

  • 5 Replies
  • 1743 Views

0 Members and 1 Guest are viewing this topic.

Wiring question
« on: August 18, 2004, 07:35:29 am »
OK, I know I should know this by now, but I've been spoiled with a pre-safety wired bike in the past.

What is the minimum Safety Wire requirements needed.  I cant seem to find anything in the rule book other than the oil filter, filler cap and drain plug.  
Like
0
Dislike
0
Agree
0
Disagree
0
No reactions
No reactions
No reactions
No reactions
Pierre Montsion
Team PMR
CCS EX# 280

*

speedster_1

Re: Wiring question
« Reply #1 on: August 18, 2004, 07:42:26 am »
Add radiator drain plug...and I think that's it.....I've passed tech w/o have any axle or caliper bolts wired...I don't recommend not doing your brakes!  I lost a bolt in practice the other day!  Got lucky the other bolt didn't come out on the track!
« Last Edit: August 19, 2004, 07:23:34 am by Super_Dave »
Like
0
Dislike
0
Agree
0
Disagree
0
No reactions
No reactions
No reactions
No reactions

*

Steviebee

Re: Wiring question
« Reply #2 on: August 18, 2004, 10:40:28 am »
oil fill, oil drain, oil filter,  and if you have a rad drain.   Only thing thats required !!

I used to do my brakes, pinch, and axel bolts.  But i quit doing it because im changing wheels during every weekend and it just another thing that takes time inbwtween races.

My rear brake caliper is still wired.
Like
0
Dislike
0
Agree
0
Disagree
0
No reactions
No reactions
No reactions
No reactions

*

speedster_1

Re: Wiring question
« Reply #3 on: August 18, 2004, 10:57:44 am »
Quick connects on the wiring helps with tire changes...just got some I need to install.

Do your brakes...you don't want to be sorry!!!!
Like
0
Dislike
0
Agree
0
Disagree
0
No reactions
No reactions
No reactions
No reactions

*

ducatiracer_#100

Re: Wiring question
« Reply #4 on: February 08, 2005, 11:05:50 am »
 ;D  I read once wire up anything that you dont want coming loose at race speed , i might have gone a little nuts in wiring my bike but when the green flag drops my concern is on turn one, not on my bike. It helps out alot...  
Like
0
Dislike
0
Agree
0
Disagree
0
No reactions
No reactions
No reactions
No reactions

*

gsxrsrad1000

Re: Wiring question
« Reply #5 on: February 17, 2005, 06:49:43 am »
ditto, since I had my bike taken all apart this winter, I took every bolt off I could think of and drilled holes through every one of them.  
Like
0
Dislike
0
Agree
0
Disagree
0
No reactions
No reactions
No reactions
No reactions