600RR Questions

[Pierre - Team PMR]

anyone know how to disable the kickstand switch?

also - should I disable the tipover shut-off switch?  If so, how?
Thanks

[lbk]

kickstand switch should be easy, just cut the two wires and short them together. If you want to be 100% positive use a multimeter tap into both of the wires if the resistance is infinite with the kickstand down and 0 with it up, then that's what you need to do.

[cornercamping]

Cut the 2 wires and tie them together, as stated above, but make sure to:

1. Solder the connection
2. Shrink Tube the connection

This is to prevent the wires from coming apart, and also protect them from the elements.  For the extra 3 mintues of work to do it this way, you can ensure a nice solid protected connection.  If the wiring comes apart because it's not protected, or the connection breaks, you got issues that can happpen...

[Jeff]

As mentioned, the kickstand is a simple cut/solder.

The bank angle sensor if you decide to get rid of it, simply pull the plug, cut & solder the OUTSIDE 2 wires together (back toward the harness of course).  The middle wire is left alone.

You can jump the clutch switch too, but I don't have the diagram in front of me to tell you which wires it is to jumper...  email me jeff@cbr600rr.com if you need more specifics.

[LMsports]

Man you guys are fast...couldn't even share my 2 cents. Need to know anything else about prepping this bike???

[Jeff]

hahah... Rob...  slow kid in the back of the class  ;D

We all missed you at G-man Rob.  Hoping to see you again at BHF.  600RR'S UNITE!!! lol  ;D

[Steviebee]

man im gonna miss the bike debut at august!

Get the suspension done  yet ?

[Pierre - Team PMR]

Get the suspension done  yet ?

Too bad...wish you could make it up!

Going to run stock suspension for the rest of the year...but I should be able to affored getting it done before next year starts

[LMsports]

Now that is something I can definitely help you with. We have tested a ton of different suspension set ups with different parts etc. Traxxion, Ohlins, GP, you name it. Can't wait for Blackhawk Jeff, Ryan and I will be there in style.

[lbk]

man im gonna miss the bike debut at august!

Get the suspension done  yet ?

What you're not going to be there? Why?

[stumpy]

 Pierre,
 Get that wiring done? Hope its coming along good. If you have any questions e-mail me! Lithium guys are great with suspension setup...Among other things.

[Pierre - Team PMR]

Thanks everyone!!