VIR Gearing ?

[RADRB8]

 I am going to VIR N for the 1st time on my 06 R6 next month and need some gearing info.

I ran1:37's last time I was there but not on a R6...

I currently have 16/47 gearing on it.

What changes do I need to make if any?

Tkanks in advance

RAD

[PDARacing]

you're going to hit the rev limiter on the straight as is. I'm 15/47 and just tap the rev limiter when i lean it over for the kink.. it still pulls out of the kink and i'm on an 07 r6 .. i'd say go back to stock in the front

[Cowboy 6]

Um, 16:47 is a faster gear set.....

[RADRB8]

  So I may be good with my Summit setup... 

I'll buy a 46 just in case...

[SVbadguy]

Gearing difference between tracks is only 1 tooth on the rear if any change at all.  Your rpm in the turns may be more of a factor than the straight.  You don't want to be stuck between gears so to speak.  You just have to figure out what works best and keep a note of it.