ESU Mounting

Started by Joeman, March 02, 2009, 03:21:37 PM

0 Members and 1 Guest are viewing this topic.

Joeman

My first race is coming up at PBIR so Im still getting the hang of everything. I recieved my ESU mounts (I ordered both) and I know that it needs to be mounted on the tail of the bike perpendicular to the rear axle. Is there any specific direction it needs to face?


-Joe

Jeff

Not technically, but the wise method is to put the open end facing the rider.  So that the unit slides in and pushes BACK towards the back of the bike.  That way if you don't have it all the way in, it may stand a chance of staying with you for a race vice flying out...
Bucket List:
[X] Get banned from Wera forum
[  ] Walk the Great Wall of China
[X] Visit Mt. Everest

Woofentino Pugrossi

Also think about putting a zip tie around it also. Mines was like that and even stayed on when the bike flipped over.
Rob
CCS MW#14 EX, ASRA #141
CCSForums Cornerworking and Classifieds Mod

ldub143

Hmmm its my first season to. Can i buy the mounts at the track or is this something i should get before i go to the track?

xb9racer

You can pick one up at the track for $5 and mount it then. Only takes a few minutes.