Clear tubing for brake reservoir to master cylinder?

[eightonezero]

Where can I get the clear tubing to go between the master cylinder and the brake reservoir?
Thanks

[tstruyk]

I got mine from Lithium.

712-546-7747

[eightonezero]

thanks

[tzracer]

Yoyodyne is another source.

http://www.yoyodyneti.com/Category.aspx?CategoryID=3013

[Headdog122]

Most of my local (Eastern NC) "kart" guys have small engine shops.  They carry all sizes and colors of line to use.

Just a thought..   


Jamie...

[eightonezero]

Havent called Lithium yet, but I'm assuming what they sell is similar to the stuff yoyodyne carries? I see yoyodyne has a minimum order amount hmm

[tstruyk]

I believe Rob sourced mine from Fred... but it all came from Rob (along with the pads, fluid and everything else I ordered)

[eightonezero]

thanks. If I get the clear tube, I'm going to put some sea monkeys in there so I can see them swim back and forth to the master cylinder

[Noidly1]

Home Depot
Lowes
True Value...

Just be careful monkeys don't through a wrench in your brakes...

[kvanengen]

Not just any clear tube from a hardware store will work. Make sure you get some brake fluid specific hose. I picked some up from lithium and it worked great. If you get a hose from a hardware store it will sweat and you my get brae fad. I hope that helps

[mattg]

Not just any clear tube from a hardware store will work. Make sure you get some brake fluid specific hose. I picked some up from lithium and it worked great. If you get a hose from a hardware store it will sweat and you my get brae fad. I hope that helps

I'm having that exact problem right now.  :(

[eightonezero]

Speaking of tubing, what is "crush."  I was told the black tubing (specifically 8mm which is on my bike now) can be clamped down to 6mm with hose clamps. I was told this is a better setup than the clear tubes, because the clear tubes don't "crush" as well?