check what?

[Sobottka]

 so i just got finished putting together my new bike(06 r6) and now my check engine light is now on?? i disconected the o2 sensor, the switch gear on the left bar and basic race prep stuff, any ideas ??? everything seems to be ok, runs fine(i think...will know this weekend!) thanks in advance! -rob

[loc_dogg]

Plug your o2 back in silly billy! That is your multiple warning light and it saying your FI (fuel injection system) is f'ed up! If you cant plug it back in then you have to buy a bypass plug, you can get them at the Power Commander web site!  Oh yeah It prob runs like crap, it may feel ok on your ass dyno! Id get the bypass plug!

[Sobottka]

maybe... but my buddys got the same set up and no warning light?

[Sobottka]

just for fun i hooked up the o2 sensor and as expected the check engine light is still on

[loc_dogg]

You do have a digital display right! So what symbol is it showing? It shoud be the oil can, thermometer, or FI symbol! Then you will know whereto start! Like I said it is a multipul warning light! Or you could have an injector unplugged, it happens!

[tstruyk]

Are you running an AM exhaust?  PC?

[Sobottka]

well... rode it over the weekend and everything seems ok. i guess ill assume its emissions related. dogg- the 06 r6 has an analog check engine light seperate from the digital display and gives error codes on the dig. i was already getting the code for the o2 sensor so wasnt (and still not) sure about why the check eng. light is on. seems my bike is the only one with this problem but all is well for now. tstruyk- arrow exh and pc 

[welldrilleRR]

What! Rob got an r6, that's great, just great

[Sobottka]

 

[tstruyk]

dumb question I think I know the answer too... but you disconnected the 02 sensor from the ECU, not unplugged from the midpipe... correct

I have a graves with PC... no problems with codes or check engine... Wasnt scotty getting a engine light?  (or was it oil)  Maybe try a search for that thread, he was one of the first posting on here about 06R6 race prep...


Good luck!

[Sobottka]

yes from the ecu, ive checked that thread for other stuff, ill check it out again. you dont get "17" on the digital w/ the ignition key on before starting? or is that not the o2 sensor code? 

[loc_dogg]

if it s o2 the code will be FI! Id call a dealer and ask what 17 means!