Map

 CCS / ASRA Racing Forum

Author Topic: R1 Front wheel help needed  (Read 997 times)

0 Members and 1 Guest are viewing this topic.

gpracer15

  • Backmarker
  • **
  • Posts: 20
  • Karma: +11/-0
R1 Front wheel help needed
« on: August 11, 2006, 10:54:37 pm »
I need to know how wide the hub is.

I also need to know what the inside to inside measurement is between rotors and how thick the rotors are.

Would like this in Milimeters.

Thanks
Chuck
Like
0
Dislike
0
Agree
0
Disagree
0
No reactions
No reactions
No reactions
No reactions

matt02r6

  • Guest
Re: R1 Front wheel help needed
« Reply #1 on: August 12, 2006, 09:59:46 am »
WHAT YEAR R1 IS IT? IM THE PARTS MANAGER AT WOODFIELD MOTOR SPORTS, SO I CAN GET YOU THE MEASUREMENTS THAT YOU NEED. JUST LET ME KNOW.

MATT
Like
0
Dislike
0
Agree
0
Disagree
0
No reactions
No reactions
No reactions
No reactions

gpracer15

  • Backmarker
  • **
  • Posts: 20
  • Karma: +11/-0
Re: R1 Front wheel help needed
« Reply #2 on: August 14, 2006, 11:52:12 am »
I was looking at the newer 2005+ front ends for both the R1 and R6 to see if
the measurements would work for my project...
Could use the measurements for both if you have the time.

I need the wheel info and also the following:

Fork length from top cap to center of axle
Fork length from top of lower triple tree where the bearing sits to center of axle.
Fork offset from center of stem to centerline of forks.


Thanks
Chuck
« Last Edit: August 14, 2006, 11:53:51 am by gpracer15 »
Like
0
Dislike
0
Agree
0
Disagree
0
No reactions
No reactions
No reactions
No reactions