Track Map for MAM?

[Jack_Brock]

Here is a website I found before I went there last year to try to help learn the layout.  Some decent on bike footage.  Hope it helps you.

http://kcplazasportbikes.com/videos/videos_index.html#racing

[Protein Filled]

Rick,

Check out their website:

http://www.pinerunracing.com/

That last map was from the Alan Wilson Design site.

I didn't realize a new track in Minnesota was in the works - Pine Run.  Edgar or any other Minnesotans have any info on that one?  Do they have finances to pull it off?  Does it look like they've got a plan that will fly?

[jarelj]

Here's a lap:
http://www.zx-10.net/Videos/MAM20040923.mpg

[Woofentino Pugrossi]

Here ya go Kimmy. ;D ;D


From 200 miles in space. ;D ;D

[Rich]

Look out for turn three - that decreasing radius has taken out a few people.  Well, thats what I've heard, anyway.   :D

[GSXR RACER MIKE]

I'll keep going till to you tell me to stop ;D ;D ;D

Ummm, are you sure you got the stamina to make that statement? ;) ;D

[GSXR RACER MIKE]

     Kim, if you haven't been there before, the track runs clockwise and the start finish line is situated about 1/3 of the way down the straight on the left hand side of the picture that Rob posted. The turn 3 decreasing radius turn that has been mentioned is that carousel looking turn at the top of that same picture, the exit of that turn really can sneak up on you pretty fast. Have fun! :)

[jarelj]

Watch out for Turn4 this year, it's the WOT 4th gear turn.  It's gotten bumpier since last year, and you'll hit the ripples at a good lean angle.  I got a nasty tank slapper going over it last weekend, and that's on an SV!!  So you folks on big bikes be careful please!  ;)

[KBOlsen]

 :oWow!  Thanks, everyone!  This should give me good "study material" for the ride out there... and will fit "just right" on the wall of my 'cube, too.

[tigerblade]

A lot of people also seem to go down in the 9-10 chicane.  I've had some slides through there.  5-6 is a lot of fun!  

[Burt Munro]

Ummm, are you sure you got the stamina to make that statement? ;) ;D

Sorry....  thought I was talking to my wife there for a second! ;D ;D