Map

 CCS / ASRA Racing Forum

Author Topic: Flatslide help with no TPS  (Read 1039 times)

0 Members and 1 Guest are viewing this topic.

crazeinc

  • Guest
Flatslide help with no TPS
« on: August 31, 2003, 09:48:28 pm »
I got a set of flatslides for my F3, but they don't have a provision for the TPS (throttle position sensor). I'm thinking they're really for an F2. What I'm wondering is if it's possible to bypass the sensor? I don't know what the TPS controls, I'm thinking ignition advance, so maybe I could put an F2 ignition on? Any help would be awesome!
Like
0
Dislike
0
Agree
0
Disagree
0
No reactions
No reactions
No reactions
No reactions

mdr14

  • 250 - 500 posts
  • ****
  • Posts: 407
  • Karma: +28/-36
  • Rock & Roll saved the world
    • MD Racing Street & Track Perf.
Re: Flatslide help with no TPS
« Reply #1 on: September 03, 2003, 09:19:53 pm »
I would schedule some dyno time, I would test it for several configurations:
with and with out the tps plugged in.
Also I would try some runs with the tps plugged in and try different differnt positions to see if any gains could be had.

Not only check WOT, by put it under a load and check partial throttle too. Use a Dynojet model 250 dyno with load control.
Like
0
Dislike
0
Agree
0
Disagree
0
No reactions
No reactions
No reactions
No reactions
Matt Drucker
MD Racing
www.mdracingstp.com