S1000RR/R/HP-4 Titax Forged wheels Lupin Blue 2012-present

[Fabba]

Titax Forged Aluminum wheels are made in the Czech Republic.Comes with everything except tires....90 degree valve stems, dtc/abs wheels, rotors, spacers, Driven 525 pitch 44,45,41 rear sprockets (41 is unused), Vortex 16 tooth (unused), captive spacers.


Front wheel has a few knicks, NOT visible when tire is mounted, (trackside guy rush job one time, No-mar changes ever since). Total mileage on wheels less than 3,000 of which ~2500 are on track.
The rear bolt pattern is Marchesini, the rear abs wheel and brake rotor are RSV4 spec, if replacement is ever needed. The front uses standard OEM BMW cast wheel abs ring and rotors, however, you CAN use BMW HP Forged spec or better rotors simply by removing the adapters and bolting in the same bolt pattern full floating rotors that would fit the BMW HP Forged wheels (standard wheel of HP-4 model, optional on 2015- present RR and R models).
These wheels with 525 pitch rear sprocket saves 10lbs 11 oz over the OEM BMW cast wheels. Probably by switching to 520 a few more ounces are still to drop, in addition to full floating rotors on front!
Rotational weight, it feels like double!


BMW HP wheels vs. Cast wheels are only 7.5 lbs.
Video link to wheels follow, ready to ship!
No trial fit, no bullshit, what you see is what you get, scammers beware, insured with signature required, documented photos of packaging process.
NOTE: these will NOT plug and play with 2010-2011 model year S1000RR due to the 1st generation rear wheel spacers/carrier offset.
https://drive.google.com/open?id=0BwqJY8plGVD0Yy1kOTlhOW9EUVk


$1850 includes shipping to lower 48.
PayPal cash/credit + add in fees, or send F&F.
Ships within 24 hours of receipt of payment.


Retail $2450, without valve stems, sprockets......
Located in Virginia.
Shane dot ardoin at gmail dot com

[Fabba]

SOLD