CCS / ASRA Racing Forum

Author Topic: Machine Requirements-Bodywork and Dampers  (Read 3987 times)

0 Members and 1 Guest are viewing this topic.

Thatdudeguybro

  • Newbie
  • *
  • Posts: 4
  • Karma: +0/-0
Machine Requirements-Bodywork and Dampers
« on: March 23, 2016, 10:18:39 am »
Hey all,

I am interested in racing with CCS this season. Going to be in the 600 superstock class. I've checked the rule book and didn't see anything, but I want to make sure I'm not overlooking it.

Are steering dampers required, and is full race body work required? Currently, I have the race upper and lower, but the stock tail and seat cowling. Thanks!

clarustnb

  • 100 - 250 posts
  • ***
  • Posts: 151
  • Karma: +10/-1
  • LWTRacer #909
    • http://rizrar.com/
Re: Machine Requirements-Bodywork and Dampers
« Reply #1 on: March 23, 2016, 10:25:59 am »
I'm not in charge - however I can read the rule book too!

Steering Dampers - Not required
Bodywork - no need, only the belly pan.  You should see some of the crap those honda Hawks and SV guys roll with. (:
Benjamin Loyle
SV650 # 909
http://loyle.lwtracer.com/

Thatdudeguybro

  • Newbie
  • *
  • Posts: 4
  • Karma: +0/-0
Re: Machine Requirements-Bodywork and Dampers
« Reply #2 on: March 23, 2016, 11:43:12 am »
Great. Thanks!

You should have seen the garbage upper I was using at my first race this past weekend at Roebling. Definitely not going that route again!

apriliaman

  • 250 - 500 posts
  • ****
  • Posts: 401
  • Karma: +38/-7
    • me
Re: Machine Requirements-Bodywork and Dampers
« Reply #3 on: March 23, 2016, 05:10:20 pm »
Hey Ben #909 maybe I should bring out my dented classic bodywork back with safety wire as my stitching it back together and many different color patches! Hey always passed tech except team pro motion didn't like it.
The main thing CCS checks is the belly pan, oil drain plug,oil fill cap and filter wired and I do radiator cap also.Anything else you want to wire is extra what you like.Brake lever feel, steering head bearing,throttle  return sometimes also.
Winner of at least 50 CCS Lightweight Regional Championships
3 National Championships
Top 10 plate holder since 2006

SVbadguy

  • 250 - 500 posts
  • ****
  • Posts: 457
  • Karma: +38/-27
  • '08 & 09 MA LWSB Champ
Re: Machine Requirements-Bodywork and Dampers
« Reply #4 on: March 23, 2016, 07:02:26 pm »
Your numbers must be legible.  And where do you intend to put your rear numbers?
Mid-Atlantic Region  #19   
MARRC Treasurer & Radio Committee Chair


Thatdudeguybro

  • Newbie
  • *
  • Posts: 4
  • Karma: +0/-0
Re: Machine Requirements-Bodywork and Dampers
« Reply #5 on: March 25, 2016, 04:43:52 pm »
Across the RR/Seat cowling combo with them on the bellypan as well. It's not one continuous surface, but my number plate itself can be. I can make the number plate continuous by laying it over the gaps, which are rather small... Is that not allowed?

bruce71198

  • 250 - 500 posts
  • ****
  • Posts: 258
  • Karma: +44/-3
Re: Machine Requirements-Bodywork and Dampers
« Reply #6 on: March 26, 2016, 09:37:56 am »


Steering Dampers -   You should see some of the crap those honda Hawks and SV guys roll with. (:

Honda Hawk? You must have been around a while...

Admin

  • Admin
  • 100 - 250 posts
  • *****
  • Posts: 140
  • Karma: +30/-0
Re: Machine Requirements-Bodywork and Dampers
« Reply #7 on: March 26, 2016, 05:31:43 pm »
I can make the number plate continuous by laying it over the gaps, which are rather small... Is that not allowed?

Isnt a problem, has been done before.

JKBRacing

  • Backmarker
  • **
  • Posts: 27
  • Karma: +1/-0
  • Amature #919
Re: Machine Requirements-Bodywork and Dampers
« Reply #8 on: May 09, 2016, 11:01:37 pm »
OK this is a little off topic but in interest of not starting another thread here it goes.
I have an SV that I just got on the track and ran my first race http://www.ccsforum.com/Smileys/newsmilies/biggrin.gif It was a blast!! However today I started my Ducati Monster and was thinking that I would like to track it as well. Would I put the same numbers on the monster as I have for my SV?
Thanks for the reply

Woofentino Pugrossi

  • Moderator
  • More than 1,000 posts
  • *****
  • Posts: 4394
  • Karma: +337/-1288
  • I wike my Pug-maha Mutt-1
Re: Machine Requirements-Bodywork and Dampers
« Reply #9 on: May 10, 2016, 01:15:59 am »
OK this is a little off topic but in interest of not starting another thread here it goes.
I have an SV that I just got on the track and ran my first race http://www.ccsforum.com/Smileys/newsmilies/biggrin.gif It was a blast!! However today I started my Ducati Monster and was thinking that I would like to track it as well. Would I put the same numbers on the monster as I have for my SV?
Thanks for the reply

Yes ALL bikes you would race use the same number.
Rob
CCS MW#14 EX, ASRA #141
CCSForums Cornerworking and Classifieds Mod