Looking to buy SV 5.5" Rear Wheel Kit

[MAZZ77X]

Like the title says, want to run 180 rubber and need the conversion kit and complete wheel set up.


Thanks, Anthony

[proechel539]

For what year SV? I have an F-3 rear wheel that is set up with captive spacers and a couple extra sprockets, came off a 1st gen SV.


Let me know if that's what you are looking for. I believe I'm not to far from you either. Belcamp Md 21017 

[MAZZ77X]

Sorry, I should have mentioned its for a 2nd gen (2009) model.


I would like to use the newest lightest GSXR wheel if possible as well.


Thanks

[proechel539]

here you go


http://www.twfracing.com/PartsPages/gsxrwheelconv.html

[MAZZ77X]

Thanks but I was hoping to get one off someone that tried it and dint like it or got out of racing an SV, etc.

I also want to buy the whole kit with the wheel and rotor if possible. Trying to chase down the right parts is a PIA and Id rather just not do that if possible.

Thanks though....

[proechel539]

Check out the WERA forum, there is a wheel for sale in the parts section, if you dont have one already

[ktmracer94]

I second TWF. Zoran had an extra wheel that I bought with the kit and he did all the machining on the carrier and spacers. All I had to do was send him my stock carrier.  I'm also pretty sure the stock sv rotor fits newer gsxr wheels. I reused my stock rotor.

[twilkinson3]

I can confirm a gen1 rotor mounts to a 06-07 GSXR rear wheel, I have the original Kit I think Zoran based his off - you need the gsxr rotor bolts tho not the sv ones...the shoulder height is different

[LWT Racer]

Are you talking about Luis's kit?


Zoran did not base his kit off any ones.  Luis's original kit is not correct.  Zoran helped Luis correct his kit.  Both kits used different spacers

[twilkinson3]

yup - one of the ones that works hehe - Zoran produces much higher quality parts than anythign else I've seen