News:

New Round added to ASRA schedule: VIR North Course

Main Menu

2010 safety wire reqs

Started by mattbnj, March 11, 2010, 01:19:08 PM

0 Members and 1 Guest are viewing this topic.

mattbnj

5.2.16 All engine, transmission, and final drive unit drain plugs and filler caps
must be visibly safety wired. Oil filter bolts must be secured with safety
wire and spin-on oil filters must be secured with a metal clamp and
safety wire or other acceptable means. Fuel and radiator caps are
exempt.

Is this all that is needed to pass tech? I do have my rear axle nut, front fork pinch bolts, and front brake caliper bolts safety wired as well. Am i missing anything else?

Thanks Matt

Woofentino Pugrossi

Thats pretty much all thats required to pass tech. My bike had more things wired than required. Hell even my streetbike is fully wired.
Rob

CCSForums Cornerworking and Classifieds Mod

mattbnj


Burt Munro

You have to understand Woofentino's motivation for safety wiring everything. 

He figures if EVERYTHING is safety wired then when he picks up crashed bikes he only has to pick up the bike and everything will still be attached.  Less work for him. 

If he had his way he would mold safety wire into race plastic so that even when it breaks it still stays in one piece.   :kicknuts:     :biggrin:
Founding member of the 10,000+ smite club.  Ask me how you can join!

Ducmarc

hey, a new use for chicken wire. or that wire they use to use to hold plaster up.

Woofentino Pugrossi

Quote from: Burt Munro on March 11, 2010, 09:10:35 PM
You have to understand Woofentino's motivation for safety wiring everything. 

He figures if EVERYTHING is safety wired then when he picks up crashed bikes he only has to pick up the bike and everything will still be attached.  Less work for him. 

If he had his way he would mold safety wire into race plastic so that even when it breaks it still stays in one piece.   :kicknuts:     :biggrin:

You should wire your BMW. We all know how german vehicles fall apart.:biggrin:
Rob

CCSForums Cornerworking and Classifieds Mod

roadracer162

Mark Tenn
CCS Ex #22
Mark Tenn Motorsports, Michelin tire guy in Florida.

skiandclimb

I wire my helmet to my head...just in case.
#730 CCS MW/GP
Pursuit Racing, The Backstopper's Org.
www.cyclehouseperformance.com - St. Louis, MO.
King Edward's Chicken and Fish- St. Louis, MO.
www.mcraracing.com

k7gixxer6

i safety wire my safety wire, you know, so it doesnt unravel in transport

alexm

Quote from: k7gixxer6 on March 27, 2010, 09:15:17 AM
i safety wire my safety wire, you know, so it doesnt unravel in transport

Pics or it didn't happen

Noidly1

#10
You should safety wire the safety wire you put on the safety wire too!
'08 R6, CCSGP44EX

alexm

Quote from: Noidly1 on April 01, 2010, 10:19:34 PM
You should safety wire the safety wire you put on the safety wire too!

The one that's for the helmet?