News:

New Round added to ASRA schedule: VIR North Course

Main Menu

Heartland Park Gearing for GSXRs

Started by ryan960, March 30, 2009, 01:06:20 PM

0 Members and 1 Guest are viewing this topic.

ryan960

Looking for anyone who has ridden the track. Wondering what people are running for gearing? I am running:

08 GSXR 600 - supersport motor
06 GSXR 750 - superbike motor

Any help would be appreciated. Thanks.

Mid Atlantic CCS EX #960

howlieboy

I don't know if the gear ratio is the same from 06-07 compared to your 08 GSXR 600, but 15/46 worked pretty well for my stock  (110 hp) 06 GSXR 600.  Not for sure about your 750. 
Kurt
www.d2cycles.com
www.caferacerinc.com

R1Racer99

I was curious about this too. I have an '07 w/ an SS motor and am looking for HPT and BHF gearing suggestions. Would I need to drop a tooth in the rear with the extra 8-10 hp over stock?

howlieboy

Depends on your corner speed, lap tiems and riding style...  I was just barely hitting the rev limiter with the 15/46 gearing on two corners, so I would think you could get away with 15/45 at HPT on your SS motor.  I also ran 15/46 at BHF (and just about everywhere else) and it seemed fine.  I don't run very well there though. 

15/45 or 46 should be a good starting point for you.  Good luck!!
Kurt
www.d2cycles.com
www.caferacerinc.com

R1Racer99

Cool, thanks for the recommendation. I've heard that rev limiter because I've been watching your HPT videos on youtube, good stuff.

jigs

15/45...similar to 16/48 but you'll get more drive out with 15/45