News:

New Round added to ASRA schedule: VIR North Course

Main Menu

More water/rain Questions

Started by Nate R, March 19, 2003, 06:49:09 AM

0 Members and 1 Guest are viewing this topic.

Nate R

OK, my windscreen doesnt line up perfectly with the fairing, and even if it did, it wouldnt be watertight.

When I was washing the bike, a lot of water was getting into the wiring and such through the screen/fairing gap.  

Is this a problem on the track, or does the wind keep the water moving enough? I'm thinking of caulking the gap, as I have some connections that won't stand up to continous water in the front.
Nate Reik
MotoSliders, LLC
www.motosliders.com
Missing my SV :-(

TreyBone


Litespeed

I would think the water would continue up and over the windscreen while riding and very little would get down into the crack.  Unless of course you are out in teh torrential down pour like we had at Firebird...

rick

I never really worried about it either. And, at firebird, the water was going anywhere it wanted!  :D

Super_KC124

I bought my bike from a salvage yard. It sat outside in the weather for months. I have had no electrical problems. If all the connections are stock, it should be fine. If you have respliced or reconnected wires that are not at least a little water resistant, mabe you should redo them. ;)

Super Dave

QuoteI'm thinking of caulking the gap, as I have some connections that won't stand up to continous water in the front.

Nate, I hope you're measuring your suspension and all too.  Did you remove your swingarm and linkage along with the steering head to see if you've got water or grim in there?  
Super Dave

Nate R

No, didnt remove the steering head or swingarm pivot. The bike had been in the rain once before I got it, and I know how much water it's seen since then. Not much time either, this winter. I will definitely be checking that stuff over the season, or before next season.

I AM attempting to set up the suspension, as well as I can.  I have to change the fork oil level (got WAY too much in there), and set proper sag.  

When I said continous water, I was just meaning while riding. The bike is garaged almost all the time.
Nate Reik
MotoSliders, LLC
www.motosliders.com
Missing my SV :-(

Super Dave

I'm just messing with you.  Good to see that you're motivated.

Proper sag only relates to the correct spring and geometry of the bike.  So, if' someone is telling you the sag to run without understanding the tires you're using, the springs you're using, the length of your rear shock, and has measured your chassis accurately...  

If those items are not known, when you set your sag, you are only setting one thing based on the potentially incorrect assumption that everything else is correct given all the variables.
Super Dave

Nate R

So, basically, to even get a good sag #, I need to talk to a suspension/setup person?   Makes sense. I guess I'll start with the most common # I've seen for SVs and work from there. I mean, if I can't yet spend the money to have someone else help me with that, where else to start?     I suppose you'll help me in August with this.
Nate Reik
MotoSliders, LLC
www.motosliders.com
Missing my SV :-(

Super Dave

So, basically, to even get a good sag #, I need to talk to a suspension/setup person?   Makes sense. I guess I'll start with the most common # I've seen for SVs and work from there. I mean, if I can't yet spend the money to have someone else help me with that, where else to start?     I suppose you'll help me in August with this.

Sag only sets the operating height.  If the geometry is such that the bike does not function correctly, a correct sag number like 30mm in front and 35mm in back really doesn't matter.  In fact, it might make problems worse.

Will a suspension guy know all this?  Potentially, no.  You can chase the sag all day long when it might actually be a matter of setting the shock length or the fork height is actually what you need.  Do you see the difference?

Then there is the difference in some tires.  Some are taller or shorter even though the sizes are listed the same.  This can have dramatic results in the chassis too...good or bad depending upon how the bike was before the change.

I can help.  Often times, we've got a window where it should be at.  Someties you've got to fudge things based on what you can't change at the time.  But the reality is to learn how it works and to recognize what the differences are by feel.  Kind of like giving someone fish to eat or teaching them how to fish...there is a difference.
Super Dave

Nate R

OK. That all makes sense. We'll work on this when I take the school, I guess. For now, I'll use some general #s and see how they work.
Nate Reik
MotoSliders, LLC
www.motosliders.com
Missing my SV :-(

Super Dave

Super Dave