Map

 CCS / ASRA Racing Forum

Author Topic: GP shifting on a 02 R1 how  (Read 1131 times)

0 Members and 1 Guest are viewing this topic.

Godzuki

  • B E
  • Backmarker
  • *
  • Posts: 62
  • Karma: +1/-1
  • yea okay
GP shifting on a 02 R1 how
« on: December 10, 2006, 11:17:45 am »
its been awhile since ive been in racing, and ive found myself looking at a R1 for some track day/ back road riding, but i like the GP shift pattern over the standard. as i looked at the 02 R1 i may be possibly getting, i noticed the shifting linkage and how it isnt going to be just flip the arm on the shift shaft and head on out, like on my last racer the F2/3 or on my long time gsxr 1100.

now i know some how some where somebody must make something to convert it to GP shifting. so what im wondering is who makes them where can i get them and how much are they.

thanks for any info on this. :cheers:
Like
0
Dislike
0
Agree
0
Disagree
0
No reactions
No reactions
No reactions
No reactions

ex gllra racer
looking to race again
still on the street and in the dirt

K3 Chris Onwiler

  • They were good gerbils, and they gave me much pleasure.
  • B E
  • More than 1,000 posts
  • *
  • Posts: 4193
  • Karma: +207/-141
  • Hours to build, seconds to destroy...
    • HIGHSIDE!
Re: GP shifting on a 02 R1 how
« Reply #1 on: December 10, 2006, 12:02:59 pm »

I'm picturing you typing this question as the Woodcraft banner ad flashes away vainly at the top of your screen.... ::)  :lmao:

http://www.woodcraft-cfm.com/Scripts/prodList.asp?idCategory=12821

Bottom of the page, for $42.99, and a CCS forum sponsor to boot!
« Last Edit: December 10, 2006, 12:05:37 pm by K3 Chris Onwiler »
Like
0
Dislike
0
Agree
0
Disagree
0
No reactions
No reactions
No reactions
No reactions
The frame was snapped, the #3 rod was dangling from a hole in the cases, and what was left had been consumed by fire.  I said, "Hey, we've got all night!"
Read HIGHSIDE! @ http://www.chrisonwiler.com

Godzuki

  • B E
  • Backmarker
  • *
  • Posts: 62
  • Karma: +1/-1
  • yea okay
Re: GP shifting on a 02 R1 how
« Reply #2 on: December 10, 2006, 04:55:09 pm »
why yes yes i was typing it as the banner. i thought about checking places like that but i figured ehh ill just ask it because i know somebody knows just what im looking for and where to find it.

thanks for the link.
Like
0
Dislike
0
Agree
0
Disagree
0
No reactions
No reactions
No reactions
No reactions

ex gllra racer
looking to race again
still on the street and in the dirt

bluedevil

  • B E
  • Backmarker
  • *
  • Posts: 30
  • Karma: +2/-0
    • DARC Racing
Re: GP shifting on a 02 R1 how
« Reply #3 on: January 19, 2007, 11:08:13 am »
No need to buy anything for the 02 R1 to convert to GP shift... atleast not a kit.... U were right.  Rotate the lever over and flip the arm....  However it will rub the frame a bit (the rod that is)  I shimmed my rearset out about 2mms to make sure it barely misses the frame.  Bought 2 new bolts for the rear set mount to the frame 5mm longer then stock.....   Works great.  Total cost about $2.29 and about 20 mins fo work....
Like
0
Dislike
0
Agree
0
Disagree
0
No reactions
No reactions
No reactions
No reactions