Whats good gearing for Daytona?  03-06 SV650.  Thanks.

Sean

depends on the wind. somwhere between a 15-44/43.

wow, what happens when you go taller?  will it not pull 6th?

Yeah, I run a 15/44 at SP and VIR..was thinking more like a 42 rear at Daytona, but never been, so was asking.

I ran 43 last year.

16/43 supersport

wow...16/43.  One up in the front over stock and one down in the rear over stock.  So basically a 15/41, but I guess the 16/43 I could use the same chain.

stock motor will not pull a 16/43. I ran 16/44 with a 90 hp motor. 15/43 is what you will end up with.

old course + supersport sv = 16/43. If your running up front with the experts. You should be able to use the same chain.

John Linder

Interesting I know three guys that were running 16/44 on newer model and couldn't pull that gearing. My bike on the dyno tached out with 16/44 was 154 mph, so if you running 16/43 on a stock motor I'm impressed. Where can I get one?

Quote from: 713 on September 08, 2006, 12:26:18 PM
old course + supersport sv = 16/43. If your running up front with the experts. You should be able to use the same chain.

John Linder

Hey John, are you and Fischer coming down to daytona this year?

Guy

Quote from: 713 on September 08, 2006, 12:26:18 PM
old course + supersport sv = 16/43. If your running up front with the experts. You should be able to use the same chain.

John Linder

16/43 for sure! Most all top expert guys ran this setup on are SS bikes. I ran 15/42 once to but depends on wind and setting up draft.