Since I cant find case covers for the YZF

Started by Woofentino Pugrossi, December 19, 2003, 07:12:58 PM

0 Members and 1 Guest are viewing this topic.

Woofentino Pugrossi

is it acceptable to mount 3/16" X 3/4" wide steel straps over the said OEM covers? I;ve seen EX500's done like that i teh past. Still good?
Rob
CCS MW#14 EX, ASRA #141
CCSForums Cornerworking and Classifieds Mod

Eric Kelcher

Yes but the case covers have been made for a number of years surprised you cannot find any. Actually the rule calls for case guards which are what you describe with hardened case covers also acceptable.
Eric Kelcher
ASRA/CCS Director of Competition

Woofentino Pugrossi

Problem is Erik, YZF750s' arent the "in" bike anymore since 96. Most of those companies stopped making them since this isnt a popular bike and not made in sufficiant quantities. I've seen less than 10 YZF750's personally in the last 6 yrs I've owned the bike. NRC doesnt have them anymore, Factory doesnt, Woodcraft never made them and Vortex doesnt anymore. Yamaha had a kit covers that were 1" thick aluminum, but are very $$ and harder to find.
Rob
CCS MW#14 EX, ASRA #141
CCSForums Cornerworking and Classifieds Mod

dwilson

After grinding my FZR's case covers pretty low I cut out some 1/4" aluminum plate, jb welded it onto the cover and trimmed it to fit with a hand grinder.  It looked decent and passed tech several times...

Woofentino Pugrossi

Well thinking of picking up a set of stock ones from ebay and seeing if a friend of mine can cnc a set of them with extra thickness.:D:D
Rob
CCS MW#14 EX, ASRA #141
CCSForums Cornerworking and Classifieds Mod