News:

New Round added to ASRA schedule: VIR North Course

Main Menu

Carb tuning?

Started by Admin, November 28, 2001, 06:08:17 PM

0 Members and 1 Guest are viewing this topic.

Admin

Is carb tuning something that can be done at home, or is this something you need a dyno for?  I'm thinking that my bike is running rich, but I'm not sure whether it is in the mid range or WOT.  Even if I was sure, I'm not sure how to adjust them.  I've changed the main jets a couple of times, but thats about as much as time as I've spent in the carbs.

Shawn

RickyRacer

What kind of carbs are they?
"HEY!, quit being a hog and pass the racepipe"
SpringsRacing
DUCATI MIAMI

Rich Desmond

It depends. Someone with some experience can do a good job at home, tho' a dyno with an analyzer is always better. If the bike hasn't been modded beyond a pipe or can you're probably on the wrong track messing with the main. Most bikes have a main jet that's plenty rich enough. It's the low-speed circuits that are lean, because the EPA tests are done at small throttle openings. I've had good luck with the Factory jet kits, following their recommendations for the screw, pilot and needle, and leaving the main alone.

Rich