Safety Wire Rquirements

Started by Faas73, February 14, 2006, 07:41:03 AM

0 Members and 2 Guests are viewing this topic.

Faas73

Please forgive me if this is a stupid question, but this is the first time I've prepped a NEW bike from scratch. My other racebikes were all pre-owned and pre-wired...

Reading over the rulebook, am I correct in understanding that the following is a complete list of the bolts REQUIRED to be safety-wired to pass inspection?

- Oil drain bolt
- Coolant drain bolt
- Oil fill cap

The reason I ask is that a whole slew of bolts on my last bike were drilled and wired when I got it (axle, pinch bolts, caliper bolts, etc). Is that a WERA requirement or am I missing something in the rulebook?

I understand wiring other bolts may be a good idea; I'm just looking for confirmation that I'm understanding the REQUIRED bolts correctly.

Thanks.

tzracer

Oil filter and any bolts for oil cooler or external oil lines.

WERA requires much more to be wired than CCS.
Brian McLaughlin
http://www.redflagfund.org
Donate at http://www.donate.redflagfund.org
 
2 strokes smoke, 4 strokes choke

steve_karson

QuoteOil filter and any bolts for oil cooler or external oil lines.

WERA requires much more to be wired than CCS.

Don't forget about the  oil drain plug too!
 ;)

Super Dave

Steve, where's your bouncy avatar?
Super Dave

steve_karson

#4
I think somebody here is using it already, so I have  a new one for here. what do you think?

Super Dave

#5
I think she's saying something about my t1t's are on fire or something...
Super Dave