you cannot slot cams and still be legal for SS correct?
just asking because it seams as though with wera you are allowed.
This was copied from another thread. I don't know if it answer's your question.
E. Engine modifications include the following:
(1.) Pistons which are no larger than 1mm over stock size may be used but must
be same compression ratio as the OEM pistons.
(2.) Original equipment cylinders must be used.
(3.) Original equipment head, valves, and cams must remain as produced, with the
exception of machining the gasket surface of the cylinder head.
(4.) Original equipment cases, crankshaft, and connecting rods must remain as
produced.
(5.) Original equipment transmission gears must be used.
(6.) Carburetor bodies and/or throttle bodies may not be modified, bored, or
polished.
yes, it is legal to change cam timing by using slotted cam sprockets...
Quoteyes, it is legal to change cam timing by using slotted cam sprockets...
Ahhh....
I was wondering if that is what he was talking about.
Thanks Edgar,
Dawn :)