Custom parts ,drillbits sharpend,old bikes resurrected,and cold beer.@17082693102
WE have started plans toward production of captive spacers .
I;m not sure if people would prefer we supply new bearings or purchase them self's ,
I will provide spacers that will snugly fit standard bearing I.D.
And when its time for new bearings you buy them,installing at that time the spacers.
PLEASE send type of bike you need parts for ,and tell me if you wont bearings or not!!
We are a full service motorcycle shop that specializes in era correct restoration of vintage imports. We have complete machine shop capability to mill custom parts for your cycle, new or old. Some applications might include custom triple trees as well as axle pullback blocks. You name the project and we can provide the service at minimal cost due to low overhead. You provide the specifications and the application and we deliver the finished product. Below is a sample of our axle pullback blocks. You can contact us at resurrection03@hotmail.com or dial us direct at 708-269-3102.
i am looking for a bike. Suzuki GSXR 750cc preferred. Anything???
Sorry not at this time. But I do see alot bikes for service ,and these street squids are helping the race community with stupid street antics and totaled body work these bikes are perfect for racing.I will keep you posted.
You people should get out and work on your bikes.
save an old race bike ,305 hawk ,maybe a 500H1 kaw.,750 honda cafe racer .
CHECK some of the time iv'e wasted
(https://www.ccsforum.com/proxy.php?request=http%3A%2F%2Fi194.photobucket.com%2Falbums%2Fz200%2Freserrection%2Fth_100_2731.jpg&hash=035060fc29689925f10e6f868d3d00daa91816cb) (http://s194.photobucket.com/albums/z200/reserrection/?action=view¤t=336e26fd.pbw)
click picture for show
we've resurrected all these junkers :kicknuts:
Kudos to Gus! (resurrection) :thumb:
He made up a set of adjusters for my 3EN1 swinger. Very nice...
I recommend him to anyone.
Thanks Gus. :cheers:
Thanks
For your kind words.
We will make an effort to continue fast and friendly service.
Soon I hope to send grasshopper with parts you racers might put to good use.
Grasshopper???
Expert 444# SV650
Yes
My bad
Boy that must mess him up to,
he's been 444 for ever.
thanks.
we've had the pleasure of meeting at his house yes?
we worked on a bike I believe
Yea I think so... A bit on my Sv right?
Was it cams and smothbores
Believe he asked me over to check installation.
He's learned a lot over the years it's nice to see it doesn't go in one ear and out other any more!!
Here are some pics. of my swinger conversion with gus' adjusters.
http://www.noidly1.com/BikePics.html
Now we need to come up with a caliper bracket to fit.
Well hello out there.
I need to update you folks on our latest product we have available the castle nut tools for SV's .
@ avery affordable 75$ shipping included and you will also receive a 25mm and 29mm socket that still work.
I can have these tools your way in 3 days.
I finally had the opportunity to use the castle nut tools resurrection made for me. They are top notch quality. They impressed the guys who worked on my bike this weekend and they've done lots of SV motor swaps. Thanks.
That awesome .
My favorite part is a happy customer
Just wanted to throw up a thanks to Gus for letting me come by his shop and taking care of a quick project for me. Very easy to work with and after talking with him for a bit, he definitely seems to have the capability to handle most any machined part you want. Looking forward to a couple more projects.
Do you have CNC milling capability?
Well to be honest no .
But my old school skills and tooling can handle most any project trust me.
I started toolmaking before CNC was the big thing .
At work I work with the CNC department .If need be I can outsource to them it's all cool.
Plase call
(https://www.ccsforum.com/proxy.php?request=http%3A%2F%2Fi194.photobucket.com%2Falbums%2Fz200%2Freserrection%2Fth_over3.jpg&hash=3e950483f5d4729d8b737ded809a01875214dc3b) (http://s194.photobucket.com/albums/z200/reserrection/?action=view¤t=0fa55943.pbw)
click the picture, for a slideshow.
that's me at the end =]
I'm the old mans helper !
happy holidays.
Thanks Gus;
Great job.
Here are some pics of the finalized piece.
http://www.noidly1.com/images/Stuff/Pics/Brake/P1010137.JPG
http://www.noidly1.com/images/Stuff/Pics/Brake/P1010138.JPG
http://www.noidly1.com/images/Stuff/Pics/Brake/P1010129.JPG
http://www.noidly1.com/images/Stuff/Pics/Brake/P1010143.JPG
Quote from: resurrection on November 04, 2007, 08:58:32 PM
that's me at the end =]
I'm the old mans helper !
happy holidays.
Dayum. Sa-weet!
You can help me anytime...
Oh yea, Happy Holidays to you too...
Check this simple sulution .
If you have an offroad ,MX,style mount .
these will fit rite in and the rubber pegs are to save your boddy in crash.Way cool and simple. Up and back .
I am looking for input .If there's intrest I'll make several sets .These were made for a KTM smx450 but they have a standerd mount so I'm sure they will fit any bike w/that mount.
(https://www.ccsforum.com/proxy.php?request=http%3A%2F%2Fi194.photobucket.com%2Falbums%2Fz200%2Freserrection%2F0105081951a.jpg&hash=5e01e76f35be2463585c96dd792541c9774c6bc9)
(https://www.ccsforum.com/proxy.php?request=http%3A%2F%2Fi194.photobucket.com%2Falbums%2Fz200%2Freserrection%2F0105081951.jpg&hash=de7a975ff806d0bec2facff9901a79da82c1c28b)
(https://www.ccsforum.com/proxy.php?request=http%3A%2F%2Fi194.photobucket.com%2Falbums%2Fz200%2Freserrection%2F0105081948a.jpg&hash=6807ba371ddccdcfe240f5a0ef24b83c76a17ee5)
I'm at resurrection03@hotmail.com
It's a flat track kinda thing these pegs
Any style peg will fit ! 60$ and you can put on your own pegs
Gus has been at it again...
I asked for something that would make it easy to measure my shock.
Here is what he came up with.
The shock as measured
http://www.noidly1.com/images/Stuff/Pics/Shockjig/ShockJig.JPG
Just hook the tape;
http://www.noidly1.com/images/Stuff/Pics/Shockjig/TapeClip.JPG
And read; 309mm
http://www.noidly1.com/images/Stuff/Pics/Shockjig/ReadTape.JPG
Thanks Gus...
This guy knows his stuff! I had him make me a bunch of random things, and he came through with quality. Pretty quick too!
Anything bikes, Gus is the answer.
Here is another thread, I guess I'll post in both. For the record, I have not started racing or doing track days or anything yet. But, definite kudos here. Custom rear sets and triple clamps, even risers. He works wonders in his machine shop. I have had this guy make a few things. He is quick with the product and reliable. I will definitely be doing business again in the future.
Thank you
And please come visit as the beer is always cold and fun to share