Got my onboards from Barber up, including the crash on the start of the GTL race. :)
http://onboardvideos.com/
Great vid.. Makes me want to go back...
and it showed me better lines to take next time
very nice., you did well ...
Thanks for the vid. Lap times?
Well.. when I wasn't getting held up :) I was in low :41.'s to occasional :40.'s.
Never hit the :39s, which was my ultimate, 'would be awesome' goal.
Great video!!! I've been looking for something like this, Thanks for providing it.
thanks for sharin the vids mike.
nice! makes me miss being @ Barber even more!
and I'll be putting the VIR vids to good use also! ;D
never been around the full course at VIR...man is that a long lap...would make an interesting race.
-brent
18th in LWGP? :)
Yea, kinda sux, should have done better if I was just a little more aggressive out of the gate. I'll redeem myself at VIR. ;D
QuoteYea, kinda sux, should have done better if I was just a little more aggressive out of the gate. I'll redeem myself at VIR. ;D
You passed me going into the chicane at about 4:55 in the video. I should have followed you instead of Brian and Edgar. ;D (Just kidding guys ;) ) I ended up 22nd.
QuoteYou passed me going into the chicane at about 4:55 in the video. I should have followed you instead of Brian and Edgar. ;D (Just kidding guys ;) ) I ended up 22nd.
Going to be at Blackhawk ;)
Cool Video, What kind of video set up did you have? I thought it was against rules for video in actual race or what they didnt know wouldnt hurt them kind of thing? Was it a bullet cam with fanny pack video camera? I am trying to decide on a video set up to buy! THANKS!
i think he uses pretty much the same thing..
i have a lipstick cam http://www.helmetcamera.com/products.htm
and a DVcamcorder from any store that takes an input ., [as small as possible] then mount both to the bike., they last better if not attached to the body ..
Yup.. helmetcam, with a Sony DV cam. Cut a hole in the nose and mount the helmetcam on the inside of the nose. Then just plug in the DV cam, wrap it in bubblewrap, and shove it inside the nose cone, like so:
(https://www.ccsforum.com/proxy.php?request=http%3A%2F%2Fsantelia.org%2Fimg%2Fposts%2FFrontfairing.jpg&hash=1db240da29929161a18e799367ada9816999bf12)
(https://www.ccsforum.com/proxy.php?request=http%3A%2F%2Fsantelia.org%2Fimg%2Fposts%2FFrontfairinginside.jpg&hash=1c7e937f265c17e9698816dee28f5606aebe7674)
thats just how i did it on my gsxr and SV ...
;)
QuoteGoing to be at Blackhawk ;)
Ya, You betcha. :)
Mike is that still dirt on your kill switch on the bar??????? :) :) :) that from slippery point?? :P
hehe, yup. :)