Text only | Text with Images

Motorcycle Racing Forum

Racing Discussion => Racing Discussion => Topic started by: Pierre - Team PMR on August 09, 2004, 11:00:06 AM

Title: 600RR Questions
Post by: Pierre - Team PMR on August 09, 2004, 11:00:06 AM
anyone know how to disable the kickstand switch?

also - should I disable the tipover shut-off switch?  If so, how?
Thanks
Title: Re: 600RR Questions
Post by: lbk on August 09, 2004, 11:07:06 AM
kickstand switch should be easy, just cut the two wires and short them together. If you want to be 100% positive use a multimeter tap into both of the wires if the resistance is infinite with the kickstand down and 0 with it up, then that's what you need to do.
Title: Re: 600RR Questions
Post by: cornercamping on August 09, 2004, 11:22:07 AM
Cut the 2 wires and tie them together, as stated above, but make sure to:

1. Solder the connection
2. Shrink Tube the connection

This is to prevent the wires from coming apart, and also protect them from the elements.  For the extra 3 mintues of work to do it this way, you can ensure a nice solid protected connection.  If the wiring comes apart because it's not protected, or the connection breaks, you got issues that can happpen...

Title: Re: 600RR Questions
Post by: Jeff on August 09, 2004, 11:26:35 AM
As mentioned, the kickstand is a simple cut/solder.

The bank angle sensor if you decide to get rid of it, simply pull the plug, cut & solder the OUTSIDE 2 wires together (back toward the harness of course).  The middle wire is left alone.

You can jump the clutch switch too, but I don't have the diagram in front of me to tell you which wires it is to jumper...  email me jeff@cbr600rr.com if you need more specifics.
Title: Re: 600RR Questions
Post by: LMsports on August 09, 2004, 11:47:54 AM
Man you guys are fast...couldn't even share my 2 cents. Need to know anything else about prepping this bike???
Title: Re: 600RR Questions
Post by: Jeff on August 09, 2004, 12:29:43 PM
hahah... Rob...  slow kid in the back of the class  ;D

We all missed you at G-man Rob.  Hoping to see you again at BHF.  600RR'S UNITE!!! lol  ;D
Title: Re: 600RR Questions
Post by: Steviebee on August 09, 2004, 12:30:05 PM
man im gonna miss the bike debut at august!

Get the suspension done  yet ?
Title: Re: 600RR Questions
Post by: Pierre - Team PMR on August 09, 2004, 12:50:07 PM
QuoteGet the suspension done  yet ?

Too bad...wish you could make it up!

Going to run stock suspension for the rest of the year...but I should be able to affored getting it done before next year starts
Title: Re: 600RR Questions
Post by: LMsports on August 09, 2004, 01:58:38 PM
Now that is something I can definitely help you with. We have tested a ton of different suspension set ups with different parts etc. Traxxion, Ohlins, GP, you name it. Can't wait for Blackhawk Jeff, Ryan and I will be there in style.
Title: Re: 600RR Questions
Post by: lbk on August 09, 2004, 02:14:25 PM
Quoteman im gonna miss the bike debut at august!

Get the suspension done  yet ?

What you're not going to be there? Why?
Title: Re: 600RR Questions
Post by: stumpy on August 09, 2004, 07:26:47 PM
 Pierre,
 Get that wiring done? Hope its coming along good. If you have any questions e-mail me! Lithium guys are great with suspension setup...Among other things.
Title: Re: 600RR Questions
Post by: Pierre - Team PMR on August 10, 2004, 10:51:56 AM
Thanks everyone!!
Title: Re: 600RR Questions
Post by: Steviebee on August 10, 2004, 12:32:41 PM
two reasons,  Funding  and i need to let my back heal some more.   It was killin me last blackhawk.

:(
Text only | Text with Images