so story has it that CCS requires motards to run a belly pan, despite the fact that AMA, LRRS and other organizations don't, my question is... how do you guys that run belly pans on them lift the bikes to use warmers since you can no longer use a center stand? how do you support the bike on your pits, since you can no longer use a center stand??? please help.
post your question to this BB for superbikers2. I know that there are a few guys on there that have run CCS.
http://www.superbikers2.com/superbikers2/superbikers2.html
motard = retard
there was a universal belly pan on ebay for $55 .,
and you are screwed puting the bike on a stand..lol
Easy solution - run a two-stroke motard, no belly pan required! :P
One way around the belly pan/stand problem is to use sport bike stands front and rear. On the rear you can either use the type with the L-shaped brackets that sits under the swingarm, or install spools on the swingarm using rivnuts and use a spool stand.
For the front I would recommend the Pit Bull fork stands that have the two horizontal posts that rotate. I wouldn't use the "nippley" style that fint in the holes on the bottom of the fork legs, as they might interfere with the compression adjusters.
-z.
come on now... there's gotta be something better than that!!!! :'( belly pans blow.... isn't a catch can good enough???
OK, here's one better...
Get an aluminum skid plate, and weld some sides and a back onto it. Now you have a belly pan that you can set on a stand ;D
Or again, better yet, just get a two-stroke motard...
-z.
Or better yet get a roadracing bike.
:D
QuoteOr better yet get a roadracing bike.
:D
got one of those too jackass :D :D :D :D :P :P :P
MOTARD = RETARD
QuoteMOTARD = RETARD
i'm gonna have to slap ya silly teammate or not, ya jackass :D :D i'll rub your nice painjob all over my motard :D