Print Page - 01-03 gsxr 600 gearing for HP/RA

Title: 01-03 gsxr 600 gearing for HP/RA
Post by: lil_thorny on March 20, 2004, 05:56:03 AM

Any suggestions?
I figure I'll run BHF gearing in Topeka.
Then 1 or 2 teeth taller for RA.
which would be:
15/45 for Topeka
16/45 or 16/46 for RA.

Title: Re: 01-03 gsxr 600 gearing for HP/RA
Post by: GSXR RACER MIKE on March 20, 2004, 07:45:13 PM

Hey Benji, how's it going? Are you doing the whole schedule this season?

BHF gearing would be a good place to start for HP. As far as RA, I would start with stock gearing and go from there, similar to Daytona gearing.

Title: Re: 01-03 gsxr 600 gearing for HP/RA
Post by: davegsxrold929r on March 21, 2004, 07:59:40 AM

yup stock gearing for RA .....

Title: Re: 01-03 gsxr 600 gearing for HP/RA
Post by: Steviebee on March 21, 2004, 04:53:12 PM

You need to put on the biggest rear sprocket you can find and a 12 front! That way i can pass you on the straight when u top out at 90 !!! :)

Title: Re: 01-03 gsxr 600 gearing for HP/RA
Post by: lil_thorny on March 22, 2004, 08:04:32 AM

Hey Mike, yeah, I'm going to try to make all of midwest.
hope to see you there.
Benj.

Motorcycle Racing Forum

Racing Discussion => Racing Discussion => Topic started by: lil_thorny on March 20, 2004, 05:56:03 AM