Print Page - Tamper Proof Torque head

Title: Tamper Proof Torque head
Post by: smoke on January 27, 2004, 05:37:30 AM

What size do I need to take off the ignition switch on a 2002 gsxr 600? Can I buy one at sears?

Webcrash : What did you use to change your tripple trees?

Title: Re: Tamper Proof Torque head
Post by: Nate R on January 27, 2004, 06:54:41 AM

I have the tool. Socket attachment. Sears didn't have them, nor did any auto parts store I went to. Ordered mine from an industrial supplier.

Actually, lbk has it. If you want it, I think he'd be willing to send it to you, and then you can send it back to me. Should cost less than $1.50 to ship, and it's a $10 part.

lbk?

Title: Re: Tamper Proof Torque head
Post by: bweber on January 27, 2004, 07:29:28 AM

I got a full set at AutoZone for about $15

Title: Re: Tamper Proof Torque head
Post by: Team_nuclear123 on January 27, 2004, 07:56:56 AM

I just used a pin punch and knocked the pin out of the torx head to remove it.

You could also drill a hole in the head of the torx bit to fit over the anti tamper pin.

Will

Title: Re: Tamper Proof Torque head
Post by: smoke on January 27, 2004, 10:07:03 AM

Thanks all.
First when the guy told me what the nut was called I took the wrong meaning. TORX wierd.

Nate and lbk thanks for the offer. I stoped by sears and craftsman had a set of all sizes. I pick it up.

Motorcycle Racing Forum

Racing Discussion => Racing Discussion => Topic started by: smoke on January 27, 2004, 05:37:30 AM