Text only | Text with Images

Motorcycle Racing Forum

Motorcycle Talk => Wrenching => Topic started by: EX_#76 on October 18, 2016, 11:23:50 AM

Title: Can you identify these throttle bodies?
Post by: EX_#76 on October 18, 2016, 11:23:50 AM
These were purchased from a person who could not remember what they came off of.  They have been modified to fit on an SV650.  You can see the brackets have been cut and welded and the linkage has been bent to fit.  I cannot figure out what they came off of and was thinking someone would be able to tell me what they are.  They should be off of some large displacement V twin. 

I don't think they are DL1000, SV1000, or TL1000 

Thanks
Guy
Title: Re: Can you identify these throttle bodies?
Post by: EX_#76 on October 18, 2016, 11:26:58 AM
there is an odd shape to the engine side of the throttle bodies as well
Title: Re: Can you identify these throttle bodies?
Post by: 713 on October 18, 2016, 12:49:24 PM
They are TL1000S throttle bodies.

John Linder
Title: Re: Can you identify these throttle bodies?
Post by: EX_#76 on October 18, 2016, 02:44:55 PM
All of the photos I have seen for the TL1000 and TL1000s do not have that shape where the throttle body would go into the boot.
Title: Re: Can you identify these throttle bodies?
Post by: 713 on October 19, 2016, 08:23:10 AM
Metal was ground off the outside of the throttle bodies right? I bought them off of ebay as TL1000s throttle bodies. I don't know if I can go back 11 years on ebay to prove it.


John Linder
Title: Re: Can you identify these throttle bodies?
Post by: EX_#76 on October 19, 2016, 10:56:08 AM
I had not considered that they may have been modified.

Thanks for the info John
Text only | Text with Images