Text only | Text with Images

Motorcycle Racing Forum

Racing Discussion => Racing Discussion => Topic started by: lbk on March 21, 2003, 06:13:11 AM

Title: Where to get numbers that meet size requirements?
Post by: lbk on March 21, 2003, 06:13:11 AM
Ok so little more help. Where in the world can I find the numbers in the size that CCS requires? Aren't they like 8" or something like that?
Title: Re: Where to get numbers that meet size requiremen
Post by: sdiver68 on March 21, 2003, 06:16:32 AM
Yes, 8" (or 6" for the rear I believe).  Lockhardt Phillips sells them.

Last year when I realized I was too late to order I printed some with a laser printer and sticker type printer stock :)  cover with clear tape and instant numbers :)

Many times they sell them at the track.

Title: Re: Where to get numbers that meet size requiremen
Post by: Dawn on March 21, 2003, 06:50:26 AM
Tom Mason - MRT usually has them at the track.

Dawn   :)
Title: Re: Where to get numbers that meet size requiremen
Post by: tshort on March 21, 2003, 07:07:21 AM
If you are in southeastern Wisconsin, try Torque Center or Lake Country Motor Sports.  Also, there's a place that will do custom numbers for you:

Stickers & Stuff
2721 S 108 - Hwy 100, just north of National Ave - in strip  mall. phone 604-2212 - , noon-8 Mon-Sat.
Troy: $25 for 1 set 8" and 2 sets 6"
Title: Re: Where to get numbers that meet size requiremen
Post by: lbk on March 21, 2003, 08:25:28 AM
Thanks everyone. I found a sign shop closer to me that does them for  $25 too.
Title: Re: Where to get numbers that meet size requiremen
Post by: davegsxrold929r on March 21, 2003, 08:34:37 AM
QuoteThanks everyone. I found a sign shop closer to me that does them for  $25 too.

$25 ouch  ,,. i will sell you some for that price ., go to a local bike shop they have them it is like $3 for 3ina package of each number ... so for $9 you have 3 complete sets to do the bike.,.,

Title: Re: Where to get numbers that meet size requiremen
Post by: Super_KC124 on March 21, 2003, 09:18:09 AM
You should be able to get 100% brand number sets at your local bike shop. You'll have to cut the serifs off the 1's. CCS is so silly sometomes. ;D
Title: Re: Where to get numbers that meet size requiremen
Post by: lbk on March 21, 2003, 01:22:54 PM
The $25 was for 1 set of 8" and two sets of 6"

I haven't found anything local that has both 8" and 6" in a package. Found 4" no problem but anything larger gets hard to find.
Title: Re: Where to get numbers that meet size requiremen
Post by: TZDeSioux on March 21, 2003, 01:34:32 PM
Go to an art supply shop. By a sheet of black vinyl sticker stock. Draw your own numbers and cut it out. It'll cost you $10 max and you can make way more than 3 sets of 8 inch numbers. Or just order from LP. A package of 3 pro digits is $3
Title: Re: Where to get numbers that meet size requiremen
Post by: OmniGLH on March 21, 2003, 02:08:18 PM
QuoteMany times they sell them at the track.


LOL... just don't buy the ones that BHF sells  ;)  They don't pass tech.  DanO and I found that out the hard way last year...
Title: Re: Where to get numbers that meet size requiremen
Post by: davegsxrold929r on March 24, 2003, 05:24:09 AM
QuoteThe $25 was for 1 set of 8" and two sets of 6"

I haven't found anything local that has both 8" and 6" in a package. Found 4" no problem but anything larger gets hard to find.

ok so for $18 then you get 3 sets of 6" and also 3 sets of 8"  ?!!?!?!!!!

and they sell them at every track as well.....  good luck
Text only | Text with Images