Anyone have the directions to remove the exhaust servo so the ECU doesn't throw error codes on a '06 Gixxer 1k? :wtf:
You'll need to pull one of the wires from the ECU harness. Take the Riders seat off so you can see the ECU.
On the ECU there are a couple of connectors, you want the remove the Gray connector. Looking at the plug from the back of the bike, count 10 places from the left on the top row. This wire will be black with a brown trace, unplug this wire from the plug (or cut and tape, your choice) you'll also need to leave the servo on the bike with it's associated wiring connected, but remove the cables.