Print Page - sv 650 wheels

Title: sv 650 wheels
Post by: LMH#427 on October 04, 2007, 08:58:55 PM

Are first generation and second gen. wheels on sv 650's interchangeable?

Title: Re: sv 650 wheels
Post by: HAWK on October 04, 2007, 09:55:26 PM

No.

Title: Re: sv 650 wheels
Post by: SV88 on October 04, 2007, 10:03:49 PM

You can get a spacer/bearing kit from SVraceshop.com to make a G1 rear fit a G2. I did it with a rain tire/rim. Note that the axel are different diameters. The problem with the front is the fender mounts - otherwise every is interchangeable.

Title: Re: sv 650 wheels
Post by: wolf44 on October 05, 2007, 07:18:16 AM

rotors are different between the two as well. g1's have an offset and g2's are flat

Title: Re: sv 650 wheels
Post by: benprobst on October 05, 2007, 05:40:12 PM

Quote from: SV88 on October 04, 2007, 10:03:49 PM
You can get a spacer/bearing kit from SVraceshop.com to make a G1 rear fit a G2. I did it with a rain tire/rim. Note that the axel are different diameters. The problem with the front is the fender mounts - otherwise every is interchangeable.

ummmm.... no. the front are not interchangable. Also there are soooo many spare parts on the market for both generations that you can get just about anything you want for cheap. Go with Hawk, and just say no.

Title: Re: sv 650 wheels
Post by: bambam on October 06, 2007, 01:25:13 AM

i have a set of gen 1 wheels for sale.

Motorcycle Racing Forum

Motorcycle Talk => Wrenching => Topic started by: LMH#427 on October 04, 2007, 08:58:55 PM