Where can I get the clear tubing to go between the master cylinder and the brake reservoir?
Thanks
I got mine from Lithium.
712-546-7747
thanks
Yoyodyne is another source.
http://www.yoyodyneti.com/Category.aspx?CategoryID=3013
Most of my local (Eastern NC) "kart" guys have small engine shops. They carry all sizes and colors of line to use.
Just a thought.. :thumb:
Jamie...
Havent called Lithium yet, but I'm assuming what they sell is similar to the stuff yoyodyne carries? I see yoyodyne has a minimum order amount hmm
I believe Rob sourced mine from Fred... but it all came from Rob (along with the pads, fluid and everything else I ordered)
thanks. If I get the clear tube, I'm going to put some sea monkeys in there so I can see them swim back and forth to the master cylinder
Home Depot
Lowes
True Value...
Just be careful monkeys don't through a wrench in your brakes...
Not just any clear tube from a hardware store will work. Make sure you get some brake fluid specific hose. I picked some up from lithium and it worked great. If you get a hose from a hardware store it will sweat and you my get brae fad. I hope that helps
Quote from: kvanengen on July 13, 2007, 01:49:43 PM
Not just any clear tube from a hardware store will work. Make sure you get some brake fluid specific hose. I picked some up from lithium and it worked great. If you get a hose from a hardware store it will sweat and you my get brae fad. I hope that helps
I'm having that exact problem right now. :(
Speaking of tubing, what is "crush." I was told the black tubing (specifically 8mm which is on my bike now) can be clamped down to 6mm with hose clamps. I was told this is a better setup than the clear tubes, because the clear tubes don't "crush" as well?
Crush is like stretch, only backwards.