Text only | Text with Images

Motorcycle Racing Forum

Racing Discussion => Racing Discussion => Topic started by: throttle on February 08, 2006, 05:04:27 AM

Title: WANTED: dyno
Post by: throttle on February 08, 2006, 05:04:27 AM
I am looking for a dyno for sale, anyone know where one is for sale?
Title: Re: WANTED: dyno
Post by: Super Dave on February 08, 2006, 07:13:42 AM
New?  I'd get a Factory Pro dyno.  Used, there are a lot of older dynojet ones.  Consistency might be a big issue.  Are you looking to do real work with a measuring too...or just make money with a dyno.  Two different philosophies there.
Title: Re: WANTED: dyno
Post by: throttle on February 08, 2006, 11:18:48 AM
Dave, We want it to do runs against the same bike for setup. A used unit would be nice ($)
Title: Re: WANTED: dyno
Post by: SVbadguy on February 08, 2006, 12:43:26 PM
Rick Beggs at Fast Lane Cycles just a got a new dyno, newer than what he had anyways.  I don't know if its for sale, but you might as well call him.  I believe it is a Dynojet 150.
Title: Re: WANTED: dyno
Post by: tshort on February 08, 2006, 03:03:37 PM
did you look on ebay? there's one there
Title: Re: WANTED: dyno
Post by: Rick Beggs on February 10, 2006, 03:52:35 PM
we just purchased a model 250i
our old one was a model 200, we are keeping that one too, sorry
Title: Re: WANTED: dyno
Post by: rickj on February 11, 2006, 04:15:37 AM
Dayton dyno in OH was making cheap bike dyno's; ~$8000.
Title: Re: WANTED: dyno
Post by: Greg_Williams on February 11, 2006, 04:56:32 AM
Do you want to be able to map fuel injection?  If so, you'll need either an eddy current dyno or a Dynojet with an eddy current add-on.  We looked at an older Dynojet which could have been bought for about $5000 but after researching it we found that it would be almost useless (at least for our needs).  Ended up going with a FactoryPro and have no regrets (just have to make the payment every month!).
Title: Re: WANTED: dyno
Post by: throttle on February 12, 2006, 09:27:07 AM
I only want it to check for improvements in mods, all I want is a HP and TQ curve.
Title: Re: WANTED: dyno
Post by: Rick Beggs on February 13, 2006, 03:25:52 PM
you can map fuel injected bikes without eddy current, just takes a little lnger, and hard to duplicate part throttle riding problems
Title: Re: WANTED: dyno
Post by: sasrocks on February 14, 2006, 03:18:34 PM
http://p197.ezboard.com/fkcplazasportbikesfrm19.showMessage?topicID=678.topic
Title: Re: WANTED: dyno
Post by: Nate R on February 15, 2006, 09:27:22 AM
Greg: How much does Factory Pro charge you a month? How long a lease, or is it a rent to own deal, or do you just have a loan on it?

PM me please if you don't want to discuss here.  :)
Title: Re: WANTED: dyno
Post by: svwrecker on February 17, 2006, 01:16:32 PM
I just met with my (former) business partners in Chicago this past weekend after the consumer motorcycle show. Our dyno tuning business has suffered due to the success of our "real" jobs. It is no more.

Bottom line is that we have a very lightly used current model DynoJet 250i with all of the current WinPEP7 software, PC included, integrated air/fuel monitor, dual cooling fans, monitor tray/arm, custom loading ramp, huge room exhaust fan, etc... Basically a top of the line motorcycle dyno set up. We've got about $30k in it...

dynojet.com/motorcycle_dyno/250i_dyno/

We are looking to sell at a steep discount from new...

Give me a call at 913-424-5300.

Thanks-

Jason
Text only | Text with Images