Motorcycle Racing Forum

Racing Discussion => Racing Discussion => Topic started by: PolishPete on September 08, 2005, 08:59:12 PM

Title: Trying to learn about the SV...help
Post by: PolishPete on September 08, 2005, 08:59:12 PM
Can someone explain SV's for me please, hopefully be buying one soon...yay, anyway...what makes them good, what makes them bad...do they have generations 99-01, 02-04 etc??  Where can I find spare parts...of course ebay, classifieds, from other racers...any websites??  Thanks in advance!!   ;D
Title: Re: Trying to learn about the SV...help
Post by: K3 Chris Onwiler on September 09, 2005, 03:42:49 AM
99-02 or 03-present.  Late models throw cranks, because Suzuki got cheap on the bearings.  My 03 has been OK, but many have exploded.  I'd get a first gen if I were starting over.
Supersport legal means stock forks and 70-75 hp.  Stock forks suck.  GSXR forks rule.  You might as well forget running supersport, because every other class the SV is good for runs superbike rules, and the superbikes are way faster than the supersport bikes, as in GSXR forks and 90-100 hp.  The hot ticket would be to find a really well built first gen SV700 with flatslides and a Gixxer front end.  That's a 6-7 grand bike though....
On the other hand, I have a friend taking podiums and the occasional win as an amateur on a stock motor and Racetech'd stock forks.  He can ride, though....
Mostly, it depends on what the other guys bring, and if they can ride it.  I'm blown away by what amateurs are bringing to the track these days.
Hey!  Don't let my reply get you down.  Someone will always spend more money than you, no matter what class you choose.  In Amateur, talent beats money every time.  In Expert, there are lots of guys who have both, so it gets harder.  You're on the right track wanting an SV.  They're easy to ride and don't eat tires.  The competition is fierce.  NO matter what you buy or how good you turn out to be, you'll have more fun than you ever had in your life!
Title: Re: Trying to learn about the SV...help
Post by: Super Dave on September 09, 2005, 06:04:43 AM
Chassis is the most important.

Building more powerful motors with various carb parts will require more work and money trying to tune it rather than focusing on the rider's issues and how the chassis works.

Quite simply, any chassis can suck.

And improvements can be made to any chassis, including old ones from the 60's or 70's.  Does not require new cartidge type forks, etc.  But there's more than one way to skin a cat.

If you're gonna start out, you've got choices.

- more of a basic motorcycle where it starts with a push button on makes reasonably consistent power.  Focus on how to make the bike "feel" for you and develop riding skills and set up knowledge.

- develop motorcycle where you have more to work on just to have reasonably consistent power.  Then try to focus on making the bike "feel" good.  

Or one could just go buy a 125GP bike.  The chassis is reasonably forgiving, they are powerful for their size, purchasing is reasonable, reasale is good.  Maintenance can be a bit more work, but with a motorcycle that weighs less than 170 pounds, nothing is really hard.
Title: Re: Trying to learn about the SV...help
Post by: grasshopper on September 09, 2005, 07:00:53 AM
QuoteChassis is the most important.

Building more powerful motors with various carb parts will require more work and money trying to tune it rather than focusing on the rider's issues and how the chassis works.

Quite simply, any chassis can suck.

And improvements can be made to any chassis, including old ones from the 60's or 70's.  Does not require new cartidge type forks, etc.  But there's more than one way to skin a cat.

If you're gonna start out, you've got choices.

- more of a basic motorcycle where it starts with a push button on makes reasonably consistent power.  Focus on how to make the bike "feel" for you and develop riding skills and set up knowledge.

- develop motorcycle where you have more to work on just to have reasonably consistent power.  Then try to focus on making the bike "feel" good.  

Or one could just go buy a 125GP bike.  The chassis is reasonably forgiving, they are powerful for their size, purchasing is reasonable, reasale is good.  Maintenance can be a bit more work, but with a motorcycle that weighs less than 170 pounds, nothing is really hard.

Uhhhmmm, Dave? The fellow was asking about a "SV650". Not that your post didn't make sense or anything, but, Have you drank your coffee this morning yet?

Back on topic:

About the SV650, K3 pretty much summed it up.

The bike is the best bang for the buck in the race community and for the street. BUY ONE! You wont be dissapointed. Aftermarket parts are endless and there is a vast network of poeple who ride them all over the world. Check out SVRIDER.COM
Title: Re: Trying to learn about the SV...help
Post by: ekraft84 on September 09, 2005, 07:05:27 AM
GSXR forks are not necessary to run fast.  I ran a '00 Superbike and an '04 Supersport and the 04 handled just as good, if not better than the '00 with stock (but reworked) forks.

An '03-'05 is faster stock than the older models, but there are definitely reliability issues with the motors.  If you get an '03-'05, you just need the right suspension setup to get going.  Get a good shock (I used Penske) and have someone setup the stock forks correctly (I used Max at Traxxion) and you can fly on the thing.

With more seat time, I believe I could have gone faster on the Supersport bike than I did on the Superbike.  I had the flatslides, built motor, etc. Just about anything you can do to a Superbike and I still think the '04 had more potential.

The SV is a great bike and perfect for starting out in racing ..
Title: Re: Trying to learn about the SV...help
Post by: dylanfan53 on September 09, 2005, 07:14:49 AM
I'll throw out here that you're not going to like the difference in power vs the R6 that you have (had).  Although, since you're starting out racing you may not notice it much.

A properly suspended SV will hang in there well in the corners and is a good bike to learn cornering, but the 600's will leave you behind at exits and straights.  Your ego will have to adjust.  At BHF experienced rider's lap times are about 3 -5 seconds slower.

Just keeping it real...
Title: Re: Trying to learn about the SV...help
Post by: ekraft84 on September 09, 2005, 07:27:02 AM
QuoteI'll throw out here that you're not going to like the difference in power vs the R6 that you have (had).  Although, since you're starting out racing you may not notice it much.

A properly suspended SV will hang in there well in the corners and is a good bike to learn cornering, but the 600's will leave you behind at exits and straights.  Your ego will have to adjust.  At BHF experienced rider's lap times are about 3 -5 seconds slower.

Just keeping it real...

You can finish in the top 10 of an amateur 600 race once you get going on it though ..

But yes, you'll get lost on the straight, but you can reel them back in everywhere else.
Title: Re: Trying to learn about the SV...help
Post by: PolishPete on September 09, 2005, 04:02:40 PM
Thanks for the help guys.  Keep it coming.  I plan to race my six after I learn on the SV...for now it's my street bike...I'll learn on the SV, move my 6 to race, and buy something else for the stree then...that's the goal at least!!
Title: Re: Trying to learn about the SV...help
Post by: Speedballer347 on September 09, 2005, 11:35:38 PM
Last generation SV brakes SUCK!
New generation SV's grenade.

We have a stock motored (w/ M4 pipe) 00 SV w/ Ohilins rear and racetech emulators front.  Handles pretty good, but ain't the ultra-lite lithe-handler so many proclaim.  Feels like an old S10 pickup truck....real predictable and you always know what it's doing in a corner, but it sure aint no Vette.

Brakes were HORRIBLE till we upgraded the calipers, now stops on a dime.

Good bike to learn on.  Not much fun on the throttle.  imho, grids are thin.  
Best thing about the SV is you don't have to sell it and buy a new bike EVERY year to stay competitive in the class.

Title: Re: Trying to learn about the SV...help
Post by: Super Dave on September 10, 2005, 05:25:34 AM
QuoteUhhhmmm, Dave? The fellow was asking about a "SV650". Not that your post didn't make sense or anything, but, Have you drank your coffee this

Don't drink coffee.  Does that make me faster?

Everything I stated applies...other than the thought of a 125.

Per my child "Speedballer", the brakes might suck on old gen SV's, but that can be a set up issue where the bike does not transfer weight correctly.

Any bike is not just a sum of its parts.  How well it works is based on how the components are use.  Where as many riders look at each others fork heights, they fail, often to recogniae that there are variances in production pieces, tires, etc. that would actually vary the lenght of the fork assembly from the bottom triple clamp to the center of the front axle.  Then the relationship of different tires and the location of the rear asle in the swingarm also affects the whole issue of feel.  Then rear shock lengths.  Wanna talk spring rates?  There's a long list of potential issues that most riders don't explore.
Title: Re: Trying to learn about the SV...help
Post by: PolishPete on September 10, 2005, 06:26:59 AM
Any way to learn all these set-up options/changes, or is this just something that takes a little time and some guess and check??
Title: Re: Trying to learn about the SV...help
Post by: Super Dave on September 10, 2005, 07:01:18 AM
Yes and no.

http://4and6.com is who I use for my intial set up using a laser type set up that can measure the intial geometry and any frame tweaks.  Often, brand new motorcycles can be bent.  Yes.

They can initially optimize the chassis geomtery.  Additionally, with their vast experience in set up for correct spring rates dampening, etc., they can get one really, really close.

Still, you're gonna go track to track, changing gearing.  Most riders are placed into the mindset that it's all on their shoulders to ride around the bike.  Ride, ride, ride.  If were that way, then AMA Pro practice would just be riding around with no mechanics.  They wouldn't be necessary.

Can you learn it?  

I can't say.  A rider needs to learn a whine about the chassis.  If you can't do that, then probably not.  Most riders, when asked, say, "It feels fine, but I couldn't probably tell anyway.  I'm going too slow."  My response is that I could probably make two changes to the bike to make it virtually unrideable.  

Shameless plug.  Yes, I teach a school.  I don't teach with CCS.  Did for about eight years at various tracks.  However, the quick in-out nature of that kind of program didn't do anything personally for me, nor did it allow for much of anything other than a quick safety program.  

I've made changes with what I've done over the years.  Had full programs for many riders operating independently with a whole staff, working as a contractor to teams at AMA events to help the riders, I've been brought to race tracks to help with bike set up and to help riders set up.  I offer a good deal of ongoing help, IF the rider asks for it.  For a year after the program, it's free.  Sometimes after that too.

Anyway, it is about getting oneself into a proper mind set.  Some riders are satisfied with everything just the way it is.  Nothing is easy to learn, and add the sensory overload and intimidation of speed to that and you have motorcycle road racing.
Title: Re: Trying to learn about the SV...help
Post by: dylanfan53 on September 10, 2005, 07:41:41 AM
QuoteLast generation SV brakes SUCK!

We have a stock motored (w/ M4 pipe) 00 SV w/ Ohilins rear and racetech emulators front.  Handles pretty good, but ain't the ultra-lite lithe-handler so many proclaim.  Feels like an old S10 pickup truck....real predictable and you always know what it's doing in a corner, but it sure aint no Vette.

Brakes were HORRIBLE till we upgraded the calipers, now stops on a dime.

Good bike to learn on.  Not much fun on the throttle.  imho, grids are thin.  
Best thing about the SV is you don't have to sell it and buy a new bike EVERY year to stay competitive in the class.


Brakes suck?  Nuh uh.  You have something else going on there.  Many of the fast guys just use the stock brakes.  Also, most complaints I've heard about handling involve Ohlins or (shudder) Fox.  Coincidence?

Check geometry.  Fork length.  Shock length.  Dave was right about this one.  Also, keep in mind people do more to this bike than many others since the stock suspension is unusable for racing.  You get a lot of different results with a lot of different components, often based on what was for sale on Ebay at the time (most likely from someone else who couldn't make it work on their bike so why would it work on yours).  

Just my $0.02 since I can't race today.
Title: Re: Trying to learn about the SV...help
Post by: andy342 on September 10, 2005, 10:38:20 AM
If you swap forks, you may need new triple clamps.  Make sure they are either adjustable, or they are the same offset as the stock SV ones.

Adjustable clamps would be best.  And they usually cost only a little more than the non adjustable brands.

And then, like Dave said, have 4 and 6 use their GMD Computrack to get you set up.

Title: Re: Trying to learn about the SV...help
Post by: Thingy on September 10, 2005, 11:32:11 AM
Pete, you are headed in the right direction simply because you are asking questions.

Like Dave said, many riders just try to ride the bike faster instead of asking questions or making changes to try and go faster.

On another note, I use ChickenHawk tire warmes.

Dave, I am going to refer to you as Super Dave of the Thong.  I am a Super Dave disciple! ;D
Title: Re: Trying to learn about the SV...help
Post by: Speedballer347 on September 10, 2005, 12:34:41 PM
I gotta disagree w/ you guys on the brakes.  We tried every brand pad (Vesrah, EBC, SBS, Oem) ... wooden with no bite or power.
When we bolted gixxer calipers to it, it will stand on it's nose w/ one finger at 60mph.

SV's an alright bike, but I still say the brake calipers are weak compared to a superbike.  But in all fairness, the bike's HP doesnt warrant superbike brakes, so it all evens out I guess.
Title: Re: Trying to learn about the SV...help
Post by: Super Dave on September 10, 2005, 01:44:44 PM
I've raced a 1969 Honda CB 750 at Daytona with stock brakes.  

Single piston calipers.  Meaning one piston on each caliper, not two opposed..

http://worldmotorcycles.com/Pages/daytona.html

Lots and lots of HP on that bike.  Lots of brakes.  Something is wrong.  I can't help you make the decision that you might be missing something, but I can offer you the opinion.  I've ridden a couple of SV's too, and I haven't found their brakes to be inadequate.

Something else is wrong.

Thingy..how's this?
Title: Re: Trying to learn about the SV...help
Post by: Speedballer347 on September 10, 2005, 02:01:34 PM
Jihad!  ;D


Title: Re: Trying to learn about the SV...help
Post by: Thingy on September 10, 2005, 05:07:22 PM
Now that is a holy war that I can get into.  Long live the thong!
Title: Re: Trying to learn about the SV...help
Post by: ekraft84 on September 10, 2005, 06:01:23 PM
If I was reading you guys argue, I'd drop the idea of getting into racing altogether.  :D
Title: Re: Trying to learn about the SV...help
Post by: Super Dave on September 11, 2005, 05:24:15 AM
Nonbeliever!  Infidel!    JIHAD!


 ;D
Title: Re: Trying to learn about the SV...help
Post by: bluedogz on September 11, 2005, 06:10:54 AM
I was going to make a comment about things blowing up but since we were talking about SV's it seemed redundant.   :-X
Title: Re: Trying to learn about the SV...help
Post by: Speedballer347 on September 11, 2005, 02:38:01 PM
99's had a recall.....spinning crank bearings.  Fix was a baffle that went into the oil pan.  We were a victim of this.
Title: Re: Trying to learn about the SV...help
Post by: Super Dave on September 11, 2005, 03:40:32 PM
Nolan plays the VICTIM card...


BAM!!!
Title: Re: Trying to learn about the SV...help
Post by: Speedballer347 on September 11, 2005, 05:29:08 PM
 :D :D :D LOL!
Title: Re: Trying to learn about the SV...help
Post by: Gixxer124 on September 11, 2005, 10:12:00 PM
Maybe it's a rider weight thing with the brakes? ;D Mine stops fine. ;)
Title: Re: Trying to learn about the SV...help
Post by: K3 Chris Onwiler on September 12, 2005, 03:29:19 AM
QuoteMaybe it's a rider weight thing with the brakes? ;D Mine stops fine. ;)
>:( >:(
Title: Re: Trying to learn about the SV...help
Post by: Dawn on September 12, 2005, 05:50:32 AM
QuoteMaybe it's a rider weight thing with the brakes? ;D Mine stops fine. ;)

Paul has never had an issue with the stock brakes on an SV.....
Title: Re: Trying to learn about the SV...help
Post by: Gixxer124 on September 12, 2005, 02:14:19 PM
QuotePaul has never had an issue with the stock brakes on an SV.....

Paul is about 7' tall!
Title: Re: Trying to learn about the SV...help
Post by: Gixxer124 on September 12, 2005, 02:15:24 PM
Quote>:( >:(
\

"I'm not fat. I'm just big boned." (Eric Cartman)
Title: Re: Trying to learn about the SV...help
Post by: tshort on September 12, 2005, 02:45:14 PM
Brakes? On an SV?  You're kidding right?  

Everybody told me to not even bother using em.  "Just hammer it out of T2, roll off on the exit and toss it in hard into the carousel - don't worry, the front will scrub off all the speed..."  Yeah, right.  

Mine work fine with rubber lines and Vesrah pads - once you get the rear wheel off the ground going into 1, how much more do you really need??  And compared to my Road King, they totally rock. :P
Title: Re: Trying to learn about the SV...help
Post by: extrakt0r on September 12, 2005, 03:56:09 PM
Just do what I did and race a 170HP R1 as your 1st race bike... Just man up and do it  ;D

Title: Re: Trying to learn about the SV...help
Post by: PolishPete on September 13, 2005, 06:01:22 AM
Haha...I'd like to survive a little longer than just that race!!
Title: Re: Trying to learn about the SV...help
Post by: grasshopper on September 13, 2005, 06:23:16 AM
Quote99's had a recall.....spinning crank bearings.  Fix was a baffle that went into the oil pan.  We were a victim of this.

All of them have a problem spinning a rod bearing, just ride a long enough wheelie, hold it up there for a mile or so in 4th gear ;)
Title: stock seat
Post by: Lowe119 on September 13, 2005, 09:00:12 AM
What about that stock SEAT?  That thing is like 7" thick. Would it benefit to use a thinner seat and get your butt down farther?  

 :-/ :-/ :-/
Title: Re: Trying to learn about the SV...help
Post by: AZ-MilleR on September 13, 2005, 10:09:29 AM
I took about 2 inches out of mine and it has really helped me move around a lot more.  I am real short at only 5'6 and the stock seat was keeping me planted dead center until I shaved it down.
Title: Re: Trying to learn about the SV...help
Post by: Super Dave on September 13, 2005, 11:16:41 AM
Usually AMA Superbike manufacturer teams have different seat set ups that allow the rider to maintain their position higher.  

If you can't move on the seat...use your legs and feet.  Shouldn't be so complicated.  

DiSalvo can to it.  Doesn't he have, like, a 14" inseam?
Title: Re: Trying to learn about the SV...help
Post by: Speedballer347 on September 13, 2005, 12:50:27 PM
QuoteAll of them have a problem spinning a rod bearing, just ride a long enough wheelie, hold it up there for a mile or so in 4th gear ;)

Got the bike used.  Rode it literally for about 15 minutes doing standups till she went  ::) ;D


penis cook wear!