How do I vent a catch can to the intake if I'm running pods?

[Gino230]

Mark #1: Glad to hear you're feeling better.

Mark #2: Yeah, life is getting tough over here at the Tranny. Schedules not conducive to racing!

I would try to gut the breather on the 800, then have Al or some other master fabricator build a big breather box. I'm continuing to run SS legal so the airbox had to remain "as produced". Like I said above, on the MCP dyno we made another 2 HP with the breather routed to the airbox, I think it sucks out the crankcase and creates a vaccum. Of course the power gain is probably offset by all of the oil being sucked in the engine! Hey, at least my valvetrain is well lubed, right?

FYI Mark #2 I had a setup like that on my old 750 and temporarily on the 1000, but I got fined at tech for not being in compliance. Henry waved it after I fixed it (routed the overflow back to the airbox).

See you clowns at the track!

[Gino230]

Dry sump on my 800 would be pretty cool. I must do something about the breather and add a larger breather box-On the hunt for more power.

Hey Mark, since the 800 is smaller maybe you could try the breather box I took off the 1000? Too small for the 1000 but maybe it will work on your bike? I'll bring it to Homestead.

[roadracer162]

Gino- That would be very cool of you. I have spopken with Al about the larger breather box and it is on my list of mods. I think it probably would work just fine for me. So all you did was to take the guts out of the stock crankcase breather?

We shall see you at Homestead.

Mark