Print Page - 600 f4i set up

Title: 600 f4i set up
Post by: 77hogan on February 09, 2005, 05:28:32 PM

I'm a new racer and I just put on race fairing and now I cant start my bike. how do I wire the front of my bike so it will start?

Title: Re: 600 f4i set up
Post by: Super Dave on February 13, 2005, 04:10:51 PM

What did you do? Take the key switch off? Remove the kill button? Clutch lever wiring? Kick stand wiring?

Title: Re: 600 f4i set up
Post by: 77hogan on February 13, 2005, 07:04:35 PM

I traced it back to the tip senser but still bon't know how to wire it

Title: Re: 600 f4i set up
Post by: Super Dave on February 14, 2005, 10:09:39 AM

Might be a resistor in there where you can't just remove it. Might want to check with someone that has more Honda experience...or retain the tip over switch. Never disabled the ones on my GSXR600 or my R6.

Title: Re: 600 f4i set up
Post by: stumpy on February 14, 2005, 10:19:56 AM

I think you connect the Red and Green together, You leave the white alone, I'll have to look for sure though...I'm 99% sure..

Stumpy

Title: Re: 600 f4i set up
Post by: cardzilla on February 14, 2005, 02:11:50 PM

Not sure of the colors but on the RC's and the RR you connect the outer two wires. My guess is it is the same on the F4i. Good move getting rid of that thing, they suck.

Motorcycle Racing Forum

Motorcycle Racing => Wrenching => Topic started by: 77hogan on February 09, 2005, 05:28:32 PM