Choose fontsize:
Welcome, Guest. Please login or register.

 

Mize Mobile, The Racer's Choice
Pages: [1]
« previous next »
  Print  
Author Topic: Ducati aftermarket slave cylinder (clutch) question  (Read 735 times)
skiandclimb
Expert
****

Karma: +55/-31
Posts: 415


Official Disgruntled Ducati Owner.
« on: January 28, 2010, 12:15:17 PM »
I have an aftermarket, over sized, slave cylinder that I picked up for my Duc. Swapping it and bleeding the line is simple enough, but unfortunately, the new oversized slave also requires a different sized clutch pushrod.  My bike is a 1999 996.  Anyone know, off the top of their head, what model/year clutch push rod I should be looking for?

Thanks in advance,

Ski
Logged
#730 CCS MW/GP
Pursuit Racing
www.mcraracing.com
Ducmarc
Lead Expert
*****

Karma: +76/-52
Posts: 749


My idea of a Sunday Stroll :)
« Reply #1 on: January 31, 2010, 10:02:33 PM »
the 99 should have the long one measure the one you have and i'll see what i have as far as i know there is only a long and a short i know i've got a couple of both
Logged
skiandclimb
Expert
****

Karma: +55/-31
Posts: 415


Official Disgruntled Ducati Owner.
« Reply #2 on: February 01, 2010, 12:24:11 PM »
Thanks a ton! I will pull it and measure. I'll get back to you ASAP, bro.

-Chris
Logged
#730 CCS MW/GP
Pursuit Racing
www.mcraracing.com
Ducmarc
Lead Expert
*****

Karma: +76/-52
Posts: 749


My idea of a Sunday Stroll :)
« Reply #3 on: February 01, 2010, 08:15:56 PM »
there's a third length after measruing   short long and longest which might be real late (for us) 12.75 "  and 13.125" is the 2 longest 
Logged
Pages: [1]
  Print  
« previous next »
 
Jump to:      

Superbike Toy Store for all your racing needs!

Powered by SMF 1.1.8 | SMF © 2006-2008, Simple Machines LLC
Phobos design by Bloc | XHTML | CSS
Page created in 0.152 seconds with 21 queries.