advanced corner marshall training

[fightinflames]

hello all,
  I've been asked to look into putting together an advanced corner marshall training program for the 2008 season. With the majority of our core Marrc workers and a number or workers from all over the united states all together here chatting about a little of everything i wanted to take advantage of it and pick your brains for ideas . I need ideas for things that you may want to learn more about. I've been approached by a few workers who are interested in how control works so I'm including that into it. But there are endless aspects of what we do every weekend that some people even our most experienced don't know or understand. I think this is going to be a great tool to add to our training program and I'm looking forward to your feed back.

Thanks,
   Allen

[TheHiriser]

Don't have much time to go into great detail and this could just be wishful thinking as well.

Motorcycle basics.  I take for granted I grew up around bikes, ridden, raced and yes crashed quite a few.  Not everyone knows where all the levers and things are.  Not everyone knows what GP shift is or even the regular shift pattern.  If we could get a bike or two to even practice picking up and moving around.  Don't have to be race bikes, they could be junkers (easier said than done most likely).

Some video of a crash or incident to play and then role play the call in to control.  For example the video of the recent T1 crash could be used.  What would your call be?  Basically practice on making correct and succinct calls into control.

Along those same lines for people interested in Control.  Role play multiple calls coming in and what takes priority.

My .02

[Kuala76]

I agree with watching crash footage and "role playing" the calls.  Hand in hand with the picking up the bike procedure, also maybe a simple intro on tie downs and loading the bikes on Junior.  Usually we have someone who is quite good loading junior, but it's always good to know how to do it!  Also, instruction to DO NOT TOUCH/PICK UP hot bike parts :):) 

[fightinflames]

great ideas  and yeah mike i agree we should use a buike to demonstrate and it just so happens i have a bike that i'm willing to use as a practice bike. please keep up the ideas i need as many as i can to help put this togther i have several ideas of my own however i would rather get them from everyone. and anyone outside the MARRC family please feel free to jump in i'd love to hear somethings you all have to say.

thanks agian,
  allen

[Simon]

I think we should get some instruction on the basics for trouble shooting our radio's. I hate calling someone to help me out with a radio problem as it almost always is a simple fix. Also, occasionally one of them gets off channel and I don't even know how to reprogram it.

[ZXYBCH]

I think we should get some instruction on the basics for trouble shooting our radio's. I hate calling someone to help me out with a radio problem as it almost always is a simple fix. Also, occasionally one of them gets off channel and I don't even know how to reprogram it.

Ditto.

[fightinflames]

so what do you all think of adding a small section on how the sanctioning body works? like grid officials,tech,starter, etc...  I'm heading down to VIR this weekend to work with CCS and I've worked it out to where I'll be able to move around and kind of take notes on how things work inside the organization. I think that understanding more of how they work will allow our workers to look at time estimates and things like that a Little more so you know why control was asking for it.  just a thought.

Allen

[Kuala76]

I know it really does sound silly, but "time estimate" training would be beneficial for me, that's for sure.  I have no concept of time when I'm out there and yet I know how important it is for those "running the show" to know what to expect.  I know that the ASDs don't like to "take over the turn" but I ALWAYS default to an ASD to help me give control my "time estimate" :). 

[TheHiriser]

Instructions on how to start Junior in the morning when you have a hangover?

[Simon]

Getting a bike re-started after its gone down. Some have tip over switch's that you have to reset by turning the ignition switch off for a few seconds and then turn on again. Holding the throttle wide open helps with some models etc.
Glen Ouye is THE master at restarting.

[Kuala76]

That is one thing I learned from experience - rider & bike down and right back up, furiously trying to start.  Convince them to turn it off, give it a couple seconds - push a bit away from the track and all will be good :).  Got a round burn mark on my gloves from a certain Kawi when the rider continuously attempted to fire the bike after being layed down, all it did was throw flames from the pipe but wouldn't stay running!  Kept yelling to stop, give it a couple seconds.  When threatened with the fire extinguisher (when the flames started catching the tail piece) - the rider finally stopped, pushed the bike a few feet, took a breath, and restarted! :)

[TheHiriser]

Hmmmmm I wonder who that rider was.

Yeah that information is very handy to know.  Seemed when I was at Pocono doing the track days that many of the riders weren't aware of this little feature until I suggested doing it.  Every time the bike started right up and they were on their way.

[Equipment Man]

Yeah Mike, don't forget we need to learn how to take the key out also


You still got those jumper cable.

[TheHiriser]

Taking the key out wasn't the problem, lol.  Forgetting to push the big button was.  I always carry those jumper cables in the van, along with a 5 ton jack and basically every tool you'd need to fix anything on it.  If you've ever seen the fleet of vehicles my boss owns you'd understand why I carry all that stuff.

[fightinflames]

Ok i got alot of feed back but i need some more, i need atleast a few more topic's to make this work. I got bike inspection,radio's,time estamate's, some about our crew, and some about the 2 groups we work for/with Wera/CCS. What i would love to hear is some from other workers from other regions, what do yall do? any imput is welcome.

Thanks,
Allen cox
Marrc cornerworker...ect.